Merrill

CSKEH50344 — Merrill Submersible Pump Splice Kit, 1/2" x 3" tubing, wire #10-12-14.A submersible pump's power cable runs splice-to-splice down into...

FVNL150 — Merrill 1-1/2" No-Lead Brass Foot Valve.A foot valve mounts at the bottom of a well's suction or drop pipe to hold the prime in the line ...

FVNL200 — Merrill 2" No-Lead Brass Foot Valve.A foot valve mounts at the bottom of a well's suction or drop pipe to hold the prime in the line betw...

FVNL400 — Merrill 4" No-Lead Brass Foot Valve.A foot valve mounts at the bottom of a well's suction or drop pipe to hold the prime in the line betw...

STA48C — Merrill Deluxe Torque Arrestor.A torque arrestor mounts directly above the submersible pump, clamped to the drop pipe, where it bears the ...

PRVNL75 — Merrill 3/4" No-Lead Brass Pressure Relief Valve.A pressure relief valve is cheap insurance for a cold-water system: as water heats and e...

STGA25 — Merrill Swivel Test Gauge Adapter.This swivel adapter lets you connect a test gauge to any standard hose-thread spigot or outlet for a qui...

LAHDT5503HV — Merrill Heavy-Duty Lightning Arrestor, for systems below 600V.A lightning arrestor is wired into the well pump circuit to protect the...

CSK75444 — Merrill Submersible Pump Splice Kit, 3/4" x 4" tubing, wire 6-8.A submersible pump's power cable runs splice-to-splice down into the wel...

CSTEH5030 — Merrill Submersible Pump Splice Kit, 1/2" x 3" tubing, wire 10-12-14.A submersible pump's power cable runs splice-to-splice down into t...

CSKEH104442 — Merrill Submersible Pump Splice Kit, 1" x 4" tubing, wire 2-4.A submersible pump's power cable runs splice-to-splice down into the we...

PGLNL100 — Merrill No-Lead Liquid-Filled Stainless Steel Pressure Gauge, 0-100 PSI.A pressure gauge threaded into the tank tee gives an at-a-glance...

PGLNL1002 — Merrill No-Lead Liquid-Filled Stainless Steel Pressure Gauge, 0-100 PSI.A pressure gauge threaded into the tank tee gives an at-a-glanc...

PGNL100 — Merrill No-Lead Pressure Gauge, 0-100 PSI.A pressure gauge threaded into the tank tee gives an at-a-glance read on system pressure, so yo...

PG100 — Merrill No-Lead Pressure Gauge, 0-100 PSI.A pressure gauge threaded into the tank tee gives an at-a-glance read on system pressure, so you ...

PGAT100 — Merrill Air Test Gauge, 0-100 psi.An air test gauge is used to check the precharge (air-side) pressure on a bladder or diaphragm pressure...

SSBD75 — Merrill 3/4" Stainless Steel Boiler Drain with Hose Bibb.A boiler drain valve gives a system a dedicated, hose-thread drain point -- turn ...

MBNL225 — Merrill No-Lead Brass Pitless Adapter, 1-1/4".A pitless adapter connects the well pump's discharge piping to the horizontal line running ...

BBDNL50MA — Merrill 1/2" No-Lead Brass Boiler Drain Valve with Hose Bibb, angle outlet.A boiler drain valve gives a system a dedicated, hose-thread...

BBDNL75MA — Merrill 3/4" No-Lead Brass Boiler Drain Valve with Hose Bibb, angle outlet.A boiler drain valve gives a system a dedicated, hose-thread...

BBD75MA — Merrill 3/4" Brass Boiler Drain Valve with Hose Bibb, angle outlet.A boiler drain valve gives a system a dedicated, hose-thread drain poi...

BATNL100QC — Merrill 1" No-Lead Brass Tank Tee, Quick Connect tank connection.A tank tee is the fitting that ties a pressure tank into the plumbing...

BATNL1002 — Merrill 1" No-Lead Brass Tank Tee.A tank tee is the fitting that ties a pressure tank into the plumbing system while giving the pressur...

BATNL1002L — Merrill 1" No-Lead Brass Tank Tee.A tank tee is the fitting that ties a pressure tank into the plumbing system while giving the pressu...

1.5-60F-F — Merrill Sediment Trapper.This filter uses centrifugal spin-down separation to pull sediment out of well or municipal water before it re...

1.5-60-F — Merrill Sediment Trapper, 1-1/2" pipe, 60 mesh.This filter uses centrifugal spin-down separation to pull sediment out of well or municip...

1.5-100ST-F — Merrill Sediment Trapper, 1-1/2" pipe, 100 mesh.This filter uses centrifugal spin-down separation to pull sediment out of well or mun...

1.5-100-FSS — Merrill Sediment Trapper, 100 mesh.This filter uses centrifugal spin-down separation to pull sediment out of well or municipal water ...

1.5-100-F — Merrill Sediment Trapper, 1-1/2" pipe, 100 mesh.This filter uses centrifugal spin-down separation to pull sediment out of well or munic...

1-100-F — Merrill Sediment Trapper, 1" pipe, 100 mesh.This filter uses centrifugal spin-down separation to pull sediment out of well or municipal w...

2-60-F — Merrill Spin-Down Sediment Filter, 2" pipe, 60 mesh.This filter uses centrifugal spin-down separation to pull sediment out of well or muni...

2-60ST-F — Merrill Sediment Trapper, 2" pipe, 60 mesh.This filter uses centrifugal spin-down separation to pull sediment out of well or municipal w...

PVCBVS150 — Merrill 1-1/2" PVC Ball Valve, Glue On.Merrill's PVC ball valve is a full-port shutoff built for PVC well and plumbing lines: the full-...

PVCBVS50 — Merrill 1/2" PVC Ball Valve, Glue On.Merrill's PVC ball valve is a full-port shutoff built for PVC well and plumbing lines: the full-siz...