{"product_id":"goulds-ws1532d4-1-1-2-hp-submersible-sewage-pump","title":"Goulds WS1532D4 - 1-1\/2 HP 230V Three-Phase Submersible Sewage Pump","description":"\u003cp\u003eThe Goulds WS1532D4 is a 1-1\/2 HP, 230V three-phase submersible sewage pump from Goulds WS Series (Model 3888D4), part of Xylem’s Goulds Water Technology line. It is rated to handle solids up to 3\" spherical through a 4\", 125# ANSI flange discharge, running at 1750 RPM. The table below shows this pump’s flow rate at four fixed total dynamic head (TDH) points, so you can match it to your specific lift and distance requirements.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 1-1\/2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage \/ Phase:\u003c\/strong\u003e 230V Three-Phase, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 1750 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge:\u003c\/strong\u003e 4\", 125# ANSI flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids Handling:\u003c\/strong\u003e 3\" spherical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Submergence \/ Working Pressure:\u003c\/strong\u003e 30 PSI maximum working pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid Temperature:\u003c\/strong\u003e 104°F (40°C) continuous, 140°F (60°C) intermittent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Cord:\u003c\/strong\u003e 20 ft standard, optional lengths available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFlow Rate at Fixed Head (TDH):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 ft. TDH:\u003c\/strong\u003e 395 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 ft. TDH:\u003c\/strong\u003e 320 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 ft. TDH:\u003c\/strong\u003e 230 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 ft. TDH:\u003c\/strong\u003e 120 GPM\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing:\u003c\/strong\u003e heavy-duty gray cast iron, ASTM A48 Class 30, volute type, compatible with an A10-40 cast-iron or A10-40B cast-iron-and-brass (non-sparking) guide-rail assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e cast iron, two-vane semi-open, non-clog design with pump-out vanes for mechanical seal protection, balanced for smooth operation (silicon bronze impeller available as an option)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Mechanical Seals:\u003c\/strong\u003e silicon carbide vs. silicon carbide outer seal and ceramic vs. carbon inner seal, stainless steel metal parts, BUNA-N elastomers - upper and lower seals are positioned independently and separated by an oil-filled chamber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e 300-series stainless steel, keyed design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e upper and lower heavy-duty ball bearings for precision positioning and to carry thrust loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Cable:\u003c\/strong\u003e severe-duty rated, oil and water resistant, with an epoxy seal at the motor end for a secondary moisture barrier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e 300-series stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Sewage systems, flood and pollution control, dewatering\/effluent, and service at farms, hospitals, trailer courts, and motels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarnings:\u003c\/strong\u003e This pump must be connected to electrical service protected by a Ground Fault Circuit Interrupter (GFCI) where required by code. Failure to do so may result in serious personal injury or death and property damage.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eDo not run this pump dry for extended periods or operate it outside its rated flow and head range. Follow the manufacturer’s wiring, grounding, and float-switch\/control-panel instructions for your specific installation.\u003c\/em\u003e\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564933488896,"sku":"WS1532D4","price":3713.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/WS_D4.jpg?v=1787955384","url":"https:\/\/waterpumpspro.com\/products\/goulds-ws1532d4-1-1-2-hp-submersible-sewage-pump","provider":"Water Pumps Pro","version":"1.0","type":"link"}