{"product_id":"goulds-rgs2012p-sub-grinder-pump-2hp-1-phase-208-230v","title":"Goulds RGS2012P - 2 HP 230V Single-Phase Submersible Grinder Pump","description":"\u003cp\u003eThe Goulds RGS2012P is a 2 HP, 230V single-phase submersible grinder pump from Goulds RGS Series, part of Xylem’s Goulds Water Technology line. It is rated to handle solids up to grinds domestic sewage solids via an anti-roping, two-blade rotary cutter system with a reversible stationary cutter ring through a 1-1\/4\" NPT discharge, running at 3450 RPM. The table below shows this pump’s flow rate at four fixed total dynamic head (TDH) points, so you can match it to your specific lift and distance requirements.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage \/ Phase:\u003c\/strong\u003e 230V Single-Phase, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 3450 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge:\u003c\/strong\u003e 1-1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids Handling:\u003c\/strong\u003e grinds domestic sewage solids via an anti-roping, two-blade rotary cutter system with a reversible stationary cutter ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid Temperature:\u003c\/strong\u003e 104°F (40°C) continuous, 140°F (60°C) intermittent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Cord:\u003c\/strong\u003e 20 ft standard, 30\/50\/100 ft optional (bare-lead); 20 ft or 30 ft optional with NEMA plug\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFlow Rate at Fixed Head (TDH):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 ft. TDH:\u003c\/strong\u003e 41 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 ft. TDH:\u003c\/strong\u003e 38 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 ft. TDH:\u003c\/strong\u003e 34 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 ft. TDH:\u003c\/strong\u003e 28 GPM\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter System:\u003c\/strong\u003e 440C hardened stainless steel rotating cutter and cutter ring, anti-roping design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e silicon bronze, semi-open, non-overloading two-vane design with pump-out vanes for mechanical seal protection, balanced for smooth operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing:\u003c\/strong\u003e cast iron, volute type, for high efficiency - adaptable for a guide-rail system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Seal:\u003c\/strong\u003e hardfaced silicon carbide sealing faces for long life, stainless steel metal parts, BUNA-N elastomers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e 300-series stainless steel, short overhang for minimum shaft deflection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e fully submerged in an oil-filled chamber for efficient heat dissipation and permanent lubrication of bearings and the mechanical seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFasteners:\u003c\/strong\u003e 300-series stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e High-head residential pressure sewage systems where a gravity system is not practical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarnings:\u003c\/strong\u003e This pump must be connected to electrical service protected by a Ground Fault Circuit Interrupter (GFCI) where required by code. Failure to do so may result in serious personal injury or death and property damage.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eDo not run this pump dry for extended periods or operate it outside its rated flow and head range. Follow the manufacturer’s wiring, grounding, and float-switch\/control-panel instructions for your specific installation.\u003c\/em\u003e\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564779675904,"sku":"RGS2012P","price":2625.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/RGS2012_e5c60184-142f-4624-8c25-fae18149f088.jpg?v=1787952508","url":"https:\/\/waterpumpspro.com\/products\/goulds-rgs2012p-sub-grinder-pump-2hp-1-phase-208-230v","provider":"Water Pumps Pro","version":"1.0","type":"link"}