{"product_id":"goulds-8m1004-6-submerible-motor-100hp-460v-3-phase-3500-rpm","title":"Goulds 8M1004 6\" Submersible Well Motor – 100 HP, 460V, Three-Phase, 3500 RPM, 7.52\" Diameter","description":"\u003cp\u003eThe Goulds 8M1004 is a 100 HP, 75 kW, 460-volt, three-phase 6\" submersible well pump motor (3500 RPM, 2-pole), sold as a motor only for pairing with a compatible 6\" submersible pump end. It features a baked-epoxy-coated, rewindable water-tight design built for long service life in abrasive, sandy well conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 100 HP (75 kW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 460V, Three-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 3500 RPM, 2-Pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor:\u003c\/strong\u003e 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Input:\u003c\/strong\u003e 127.0 Amps \/ 87600 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps \/ Watts:\u003c\/strong\u003e 145.0 Amps \/ 101300 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 795\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Load Efficiency:\u003c\/strong\u003e 85.2%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Diameter:\u003c\/strong\u003e 7.52\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 58.27\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 518 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Water Temperature:\u003c\/strong\u003e 77°F (25°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Flow Past Motor:\u003c\/strong\u003e 0.5 ft\/sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrust Bearing:\u003c\/strong\u003e Kingsbury-design Type C, 6 shoes -- 10,000 lbs down thrust, 1,000 lbs up thrust (momentary rating, 3 min. max; consult factory literature for continuous ratings by mounting hardware)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e NSF\/ANSI Standard 61 listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e Baked-epoxy-coated carbon steel frame with water-tight insulated wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e Specially developed, denatured polypropylene coil conductor insulation applying three separate barriers against the motor's cooling fluid, for extended service life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSand Protection:\u003c\/strong\u003e Double-row, grease-packed, lip seals with a carbon steel slinger (baked epoxy coated) to keep sand out of the lip seal area, plus a close-tolerance (.02in) slinger guide fit for additional sand-intrusion protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStator Laminations:\u003c\/strong\u003e High quality electrical-grade silicon steel for high torque, even under nominal voltage variation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Balance:\u003c\/strong\u003e Balance rings on each end of the rotor for excellent dynamic balance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e Two carbon, water-lubricated sleeve guide bearings to align the shaft and reduce whipping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water-filled design -- internal cooling water is mixed with antifreeze\/antirust liquid, allowing storage down to -22°F (-30°C); two water plugs are provided for filling, draining, and checking the water level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Protection:\u003c\/strong\u003e All external and internal cast iron parts finished with a baked epoxy resin coating for excellent resistance to water and corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e NSF\/ANSI Standard 61 listed (Drinking Water System Components)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Commercial, irrigation, and agricultural water wells; motor only -- pair with a compatible 6\" submersible pump end for a complete installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eInstallation note: this motor must remain fully submerged in water for proper cooling and lubrication, with adequate flow past the motor per the minimum flow rate above. Single-phase motors require the matching control box listed above; wiring must be performed by a qualified electrician in accordance with local codes and the National Electrical Code.\u003c\/em\u003e\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799220957440,"sku":"8M1004","price":16888.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/centripro-180x300_f626df70-1f5a-4c25-bbb3-2eda71020019.jpg?v=1780611317","url":"https:\/\/waterpumpspro.com\/products\/goulds-8m1004-6-submerible-motor-100hp-460v-3-phase-3500-rpm","provider":"Water Pumps Pro","version":"1.0","type":"link"}