{"product_id":"goulds-6m202-6-submersible-motor-20hp-230v-3-phase-3500-rpm","title":"Goulds 6M202 6\" Submersible Well Motor – 20 HP, 230V, Three-Phase, 3500 RPM, Voltage Change Plug","description":"\u003cp\u003eThe Goulds 6M202 is a 20 HP, 15 kW, 230-volt, three-phase 6\" submersible well pump motor (3500 RPM, 2-pole), sold as a motor only for pairing with a compatible 6\" submersible pump end. It features a stainless steel canned design built for long service life in abrasive, sandy well conditions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 20 HP (15 kW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V, Three-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 3500 RPM, 2-Pole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor:\u003c\/strong\u003e 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Input:\u003c\/strong\u003e 54.0 Amps \/ 17930 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps \/ Watts:\u003c\/strong\u003e 60.0 Amps \/ 20650 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 392\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Load Efficiency:\u003c\/strong\u003e 83.2%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Diameter:\u003c\/strong\u003e 5.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 31.50\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 137 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Water Temperature:\u003c\/strong\u003e 95°F (35°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Flow Past Motor:\u003c\/strong\u003e 0.5 ft\/sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrust Bearing:\u003c\/strong\u003e Kingsbury-design Type A, 3 shoes -- 3,500 lbs down thrust, 300 lbs up thrust (continuous)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Change Plug:\u003c\/strong\u003e Field-changeable between 230V and 460V using the PLUG-230V or PLUG-460V accessory plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e NSF\/ANSI Standard 61 listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e Stator coil mounted in a stainless steel frame, completely sealed in a stainless steel cylinder; the space between the stator's can and frame is filled with a specially formulated, heat-resistant patented resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Wire:\u003c\/strong\u003e Replaceable plug-in motor lead, 150in (150\") long and field replaceable; Ethylene-Propylene rubber insulated chloroprene cabtyre cable, color coded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSand Protection:\u003c\/strong\u003e Double-row, grease-packed, lip seals with a carbon steel slinger (baked epoxy coated) to keep sand out of the lip seal area, plus a close-tolerance (.02in) slinger guide fit for additional sand-intrusion protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStator Laminations:\u003c\/strong\u003e High quality electrical-grade silicon steel for high torque, even under nominal voltage variation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor Balance:\u003c\/strong\u003e Balance rings on each end of the rotor for excellent dynamic balance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e Two carbon, water-lubricated sleeve guide bearings to align the shaft and reduce whipping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water-filled design -- internal cooling water is mixed with antifreeze\/antirust liquid, allowing storage down to -22°F (-30°C); two water plugs are provided for filling, draining, and checking the water level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Protection:\u003c\/strong\u003e Stainless steel can housing, shaft and bolts; all other metal parts finished with a baked epoxy coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e NSF\/ANSI Standard 61 listed (Drinking Water System Components)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Commercial, irrigation, and agricultural water wells; motor only -- pair with a compatible 6\" submersible pump end for a complete installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eInstallation note: this motor must remain fully submerged in water for proper cooling and lubrication, with adequate flow past the motor per the minimum flow rate above. Single-phase motors require the matching control box listed above; wiring must be performed by a qualified electrician in accordance with local codes and the National Electrical Code.\u003c\/em\u003e\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799220400384,"sku":"6M202","price":4733.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/centripro-180x300_2dc3165b-8e84-44a8-b397-91e446b84249.jpg?v=1780611296","url":"https:\/\/waterpumpspro.com\/products\/goulds-6m202-6-submersible-motor-20hp-230v-3-phase-3500-rpm","provider":"Water Pumps Pro","version":"1.0","type":"link"}