{"product_id":"3sdx12g5jc-expl-proof-sub-sewage-pump-2hp-575v-3ph-2-5","title":"Goulds 3SDX12G5JC Explosion-Proof Submersible Sewage Pump – 2 HP, Three Phase, 575V, Class 1 Div 1 Groups C \u0026 D","description":"\u003cp\u003eThe Goulds 3SDX12G5JC is a 2 HP explosion-proof submersible sewage pump rated for hazardous locations, with a two-vane semi-open non-clog impeller and a 3\" ANSI-flanged discharge. It runs on 575V, three phase, 60Hz, 1750 RPM power. Explosion Proof Motor: For use in hazardous locations. Rated Class 1, Division 1, Groups C \u0026amp; D.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 575V, 60Hz, 1750 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 2.8 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps (1.15):\u003c\/strong\u003e 2.6 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 17.6 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge:\u003c\/strong\u003e 3.0\" ANSI 125# flanged, horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids Handling:\u003c\/strong\u003e 2.5\" max spherical solids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Diameter:\u003c\/strong\u003e 6.12\" (code J)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 250 lbs (brochure spec table)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Cord:\u003c\/strong\u003e 25 ft standard (50 ft optional), 14\/4 SOW\/SOOW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Submergence:\u003c\/strong\u003e 200 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure:\u003c\/strong\u003e 100 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Ambient Temperature:\u003c\/strong\u003e 104°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Run Time in Air:\u003c\/strong\u003e 15 min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Starts Per Hour:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture Protection:\u003c\/strong\u003e Dual moisture-sensing probes in oil-filled seal chamber between inner\/outer seals; must be wired to seal-fail relay in control panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExplosion-Proof Rating:\u003c\/strong\u003e Explosion Proof Motor: For use in hazardous locations. Rated Class 1, Division 1, Groups C \u0026amp; D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Listing:\u003c\/strong\u003e Tested by CSA to UL Std's 778, 1207 and 674. Tested by CSA to CSA 22.2 Std's 108-M89 and 145-M1986. These ratings cover use in Hazardous (Classified) Locations Class I, Division 1, Groups C \u0026amp; D; Class II, Groups E, F \u0026amp; G. File #LR38549.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplicable Standards:\u003c\/strong\u003e NEMA, IEEE, ANSI, NEC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e Cast iron, ASTM A48 Class 30 (standard, material code 1003); optional silicon bronze, ASTM B584 C87600 (material code 1179)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing:\u003c\/strong\u003e Heavy duty gray cast iron, ASTM A48 Class 30 (material code 1003)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e 416 stainless steel, keyed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e Single row, greased-for-life, sealed ball bearings (radial+thrust), L10 17500 hrs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e NEMA Design B, air-filled, F, 155C (310F) insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Enclosure:\u003c\/strong\u003e Cast iron, ASTM A-48 Class 30 (minimum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Protection:\u003c\/strong\u003e Two (2) normally-closed on-winding thermostats, automatic reset; open at 153C (307F), reset\/close at 140C (284F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Seal System:\u003c\/strong\u003e Upper (fixed): carbon\/rotary, ceramic\/stationary, Buna elastomers, 304SS metal parts. Lower\/outer (5th char=1, standard on all 20 SKUs): carbon\/rotary, ceramic\/stationary, Buna elastomers, 304SS metal parts -- tandem seal system in oil-filled seal chamber w\/ dual moisture sensor probes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Submersible sewage pumping in Class I, Division 1, Groups C \u0026amp; D hazardous locations -- lift stations and wastewater applications where explosive or flammable vapors may be present.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799132778752,"sku":"3SDX12G5JC","price":9065.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/Goulds3SDX_74b87ef3-f8d9-4ea2-8b2e-1e4d412f1046.png?v=1780610990","url":"https:\/\/waterpumpspro.com\/products\/3sdx12g5jc-expl-proof-sub-sewage-pump-2hp-575v-3ph-2-5","provider":"Water Pumps Pro","version":"1.0","type":"link"}