Goulds J10 1 HP Convertible Water Well Jet Pump 115/230V 1PH

Goulds J10 1 HP Convertible Water Well Jet Pump 115/230V 1PH FEATURES Convertible: May be used on shallow or deep well applications using appropriate Goulds Water Technology fittings. Serviceable: Back pullout design for service without disturbing piping. Two compartment motor for access to wiring and replaceable components. Nozzle clean out plug in shallow well adapter. Corrosion resistant, plastic tubing and fittings are easily removed for cleaning. Premium O-ring design fittings need only be hand tight to seal. Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant. Diffuser (Guidevane): Bolt down Lexan® diffuser has stainless wear ring for extended performance in abrasive conditions. Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coat paint is baked on. Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself. APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1-1/4" NPT suction, 1" NPT discharge, 1" NPT drive (pressure) Pressure switch: AS4 preset at 30-50 PSI Motor: NEMA standard 60 Hz 1 HP, 115/230 V capacitor start Single phase 3500 RPM Built-in overload with automatic reset Stainless steel shaft Rotation: clockwise when viewed from motor end UL778 listed Maximum temperature: 140F SYSTEM COMPONENTS Basic Pump Unit: Includes pump and motor, pressure gauge and bushing, pressure switch with tubing and fittings. ADDITIONAL COMPONENTS REQUIRED Shallow Well Package: Includes shallow well adapter, nozzle, venturi (diffuser), gasket, bolts and pipe plugs OR Deep Well Package: Choose either a twin pipe or packer style. Twin pipe includes jet body, nozzle, venturi (diffuser) and foot valve. Packer includes packer body, nozzle, venturi (diffuser), and built-in check valve. NOTE: Packer systems also require a packer adapter on the wellhead. Deep well systems require a pressure control valve. NOTE: YOU MUST HAVE A JDW OR AV22 KIT TO MAKE THE PRESSURE SWITCH CONNECTION. Pressure tank required on all systems. At Water Pumps Pro we strongly recommend that all installation, repairs, and part replacements be undertaken by a certified and licensed technician, contractor, local pump and motor repair shop and not by the owner. Failure to repair pumps, motor and electrical equipment correctly could result in electrical shock, fire hazard, unsatisfactory performance, equipment failure, and even death. Neither the equipment manufacturer nor Water Pumps Pro makes any representation or warranty of any kind to the Buyer that he or she is qualified to neither install nor make any repairs to the products.