Goulds 3AS50 Replaces BF50 Aquavar SOLO Sub Pump Controller 5HP

  • Model: 3AS50
  • Manufactured by: Goulds

 Ask a Question 

See Price in Cart

Add to Cart:
Goulds 3AS50 Replaces BF50 Aquavar SOLO Sub Pump Controller 5HP FEATURES NEMA 3R Enclosure: Rainproof, outdoor/indoor rated enclosure. Current Limit Selector Switch: Rotary switch to set current limit to match motor Service Factor Amps (SFA). Dry Well Sensitivity Switch: Choice of low or high sensitivity. Pressure Drop: Choose a 5 or 20 PSI pressure drop for restarts. Low Pressure Cut-Off: Set on or off depending on application. Constant Pressure: Provides consistent pressure even as flow requirements vary. Controller acts as a pump protection and troubleshooting device. Flashing lights indicate system faults. Standard pressure sensor cable is 10' long. Optional lengths of 25', 50', 100', 150' and 200' are available.Integrated output motor filter protects the motor from voltage spikes and limits electrical interference with devices such as portable telephones, radios, televisions and garage door openers. Controller Temperature Range: Minimum Ambient Temperature: 14F (-10C) Maximum Ambient Temperture: 122ºF (50C) Input Voltage: single-phase, 230 Volt, two (2) wire grounded system. Output Voltage: variable frequency, variable voltage, three-phase power to the motor. Speed Selector Switch: Selects Output Frequency of either - 30 - 60 Hz - Use matched HP Water End and Motor 30 - 80 Hz - Use mis-matched Water End and Motor Enclosure Dimensions: Height: 18.6" Width: 9.9" Depth: 5.3" Packaged Dimensions: Height: 21" Width: 13" Depth: 8" 3AS50 SPECIFICATIONS HP Range: 5 Unit Weight: 25 lbs. Packaged Weight: 29 lbs. Pressure Set point adjustable from 20 - 100 psi using the standard 200 psi sensor.

This product was added to our catalog on Wednesday 31 December, 1969.

Your IP Address is: 18.119.163.95
Copyright © 2024 Water Pumps Pro