Goulds 5GP0715 30-80 Hertz Propak Kits 1.5 HP

Goulds 5GP0715 30-80 Hertz Propak Kits 1.5 Horse Power. KIT CONTAINS 3AS20, M15432, & 7GS07. AQUAVAR Kits Kits include: • CentriPro Three Phase Motor 1.5 – 5 HP, 230 V • CentriPro Aquavar SOLO™ Controller with Transducer • Goulds Pumps GS Water End (pump) • Kits available for: • 30-60 Hz Operation – BGPROPAK60 • 30-80 Hz Operation – BGPROPAK80 ProPak Features: • Simple, fast sizing and installation. • Three phase output to motor reduces wire cost. • Range curves and selection charts generated from actual R&D tests. • Goulds model GS features the Guardian bearing system and field proven sand and • Kits configured for either 30-60 or 30-80 Hz abrasive handling floating stack design. maximum operation. • Switch Input for connecting a pressure switch • Wiring is as easy as standard three-wire or float switch. control box: • Grounding provisions for transducer and • L1, L2 and Ground in from power supply transducer cable. • Red, Yellow, Black and Ground out to motor ProPak kits do not include pressure tanks, • Pressure is factory preset at 50 psi with order tanks separately. simple, fast, field adjustability for higher pressures. Aquavar SOLO Controller Transducer Features: Features: • Large port orifice to prevent clogging New, more versatile user interface board • Case to electronics surge protection • Provides switch connection for optional • All Stainless Steel construction pressure or level switch • Pressure surge capability without the use • New current limit settings for all new of a pressure snubber CentriPro motors • Case coupled noise immunity • Dry well sensitivity switch • Reverse voltage protection • Low pressure cut-off protection • Line to electronics ground surge protection • 5 or 20 PSI pressure drop restart switch on all lines • Transducer better protected from transient • Transducer cable has ground wire built-in power surges • Ground clamp provided for transducer to cable grounding