Goulds 2GV3018BD 2" GV Plus Sewage, 3 HP, 208V, 1PH, 60Hz

Goulds 2GV3018BD 2" Submersible GV Plus Sewage Pump, 3 HP, 208V, 1 Phase, 60Hz Dual Seal with Sensor Probe FEATURES Impeller: Cast iron multi-vane vortex style, with rip vane on the back edge of the impeller for removing stringy solids. V model designation for vortex impeller Casing: Cast iron 2" NPT volute with volute self-cleaning design for nonclogging. Efficient air-filled motor Dual Mechanical Seals: For standard and Explosion Proof models, Tungsten Carbide vs. Ceramic seal faces standard on outer seals. Carbon vs. Ceramic seal faces standard on inner seals. Seal Sensor / High Temperature Probe: Located in motor housing. If pumpage should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires MiniCAS device in the control panel. Capable of running dry without damage to components. Designed for continuous operation, when fully submerged. Explosion-proof FM available as option. FM approved. Shaft: Corrosion resistant, 400 series stainless steel. Taper lock and impeller bolt on all models to guard against component damage on accidental reverse rotation. Fasteners: 300 series stainless steel Grease for life bearings APPLICATIONS Specifically designed for the following uses: Sewage systems Dewatering/Effluent Water transfer Light industrial Commercial applications Anywhere waste or drainage must be disposed of quickly, quietly and efficiently. SPECIFICATIONS Pump: Maximum soft solid size: 2" Capacities: up to 275 GPM Total heads: up to 82' TDH Discharge size: 2" NPT Motor: Maximum ambient temperature: 104 F (40 C) continuous duty Rated for continuous duty when fully submerged Insulation: Class H; XP = F Class 60 Hertz Single row ball bearings 400 Series stainless steel keyed shaft Requires external motor components for single phase (not included) Requires overload protection in panel (not included) Includes high temperature sensor for winding protection AIR-FILLED MOTOR Efficient heat dissipation Run dry capability Class H insulation; XP = F Class Designed for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits and can be operated continuously without damage when fully submerged. Bearings: Upper and lower heavy duty ball bearing construction for precision positioning of parts and to carry thrust loads. High temperature winding protection Cord: Severe duty rated, oil and water resistant. 30 foot standard. O-ring: Assures positive sealing against contaminants and oil leakage.