Berkeley B53602S Series C Centrifugal Pump, 3 HP, 230V, 1PH

Berkeley B53602S Series C Straight, Centrifugal Pump, 3 HP, 230V, 1PH, 1 1/2" Suction, 1 1/4" Discharge, electric motor drive, cast iron construction, silicon bronze impeller.
Model Number: C1-1/4TPMS

The Type C Pump is a compact, horizontal, single stage, centrifugal pump close-coupled to an electric motor. The removal of readily accessible bolts back pull-out construction), permits the removal of the pumping element, exposing the impeller and seal for inspection, without disturbing the piping.

Application: General farm or home irrigation, air conditioning and refrigeration.

Specifications: Body and Base - Gray cast iron
Bracket - Cast iron
Impeller - Silicon bronze
Shaft - Threaded stainless steel

Features: Flow Rates - To 160 U.S. gallons per minute.
Discharge sizes - 1-1/4" through 2".
Temperature - Applications up to 200 degrees F.
Manufacture - Carefully manufactured with materials best suited for water pump applications assures a unit with long life and dependability.
Bracket - Sturdy cast iron bracket houses seal and maintains positive alignment between motor and volute case.
Volute Case - Precision machined gray cast iron, with NPT tapped openings for suction and discharge. Standard discharge position is horizontal, as pictured. Volute may be rotated for vertical-up discharge.
Impeller - Enclosed multi-vane silicon bronze impeller is balanced to eliminate vibration and provide smooth, quiet operation. Impeller is threaded on motor shaft for positive alignment.
Shaft Seal - Self-adjusting, water cooled, mechanical shaft seal prevents leakage and eliminates need for drain piping. Run-in and periodic adjustment is not required.
Motor Shaft - Stainless steel shaft is threaded for direct mounting of impeller. Shaft extension to impeller is short to increase shaft rigidity and to extend bearing life.
Motor - Heavy-duty, 3 HP, flange mounted, motor designed for continuous 3600 RPM operation. Two ball bearings are permanently lubricated, eliminating the need for re-lubrication service. Open, drip-proof enclosures are standard. All models can be furnished with either single-phase (230V) or three phase (230/460) motors. Totally enclosed fan-cooled motor is available for three-phase power.