Econ Stennicator Pump

The Stennicator is adaptable to all existing houses with pulsing dry contact water meters, no additional equipment is required. Click here to watch a fun, animated video to see how. Typical medicators use water to mix stock solutions needed for injection and are adversely affected by poor water quality such as grit, hardness or iron. Poor water quality does not affect the performance of the Stennicator; the pump injects straight into the water line eliminating garden hose bypasses that restrict flow. In addition, the pump is more than just a medicator, it is compatible with a wide range of livestock solutions and can inject strong acids and disinfectants without harm to the pumps's moving parts. The chemicals are contained in the peristaltic pump tube and suction and discharge lines. All Stenner peristaltic metering pumps are self-priming and do not lose prime from gaseous solutions. The Stennicator has a small footprint and can be easily adapted into all existing houses with pulsing water meters. An injection check valve is installed into the water line, two lead wires from the Stennicator are connected to the water meter and another two leads are connected to the controller. Suction and discharge lines are secured and the pump is plugged into a 110V outlet. For water flows up to 5.4 gallons per minute, a second Stennicator can be added for a duplex installation. A third pair of leads can be intertwined to cut the run time in half. This allows injection at 1:256 so two pumps can be wired in series to accommodate higher flow rates.