Goulds 3GV9515BD 3" GV Plus Sewage, 9.5 HP, 575V, 3PH

Goulds 3GV9515BD Submersible 3" GV Plus Sewage Pump, 9.5 HP, 575V, 3 Phase, Dual Seal with Seal Sensor Probe. FEATURES Impeller: Cast iron multi-vane vortex style, with rip vane on the back edge of the impeller for removing stringy solids. V model designation for vortex impeller Casing: Cast Iron construction with large unobstructed passage way to pass large solids. Efficient air-filled motor Stand: Optional stand for mounting without slide rail configuration. Part number: 7482200 Dual Mechanical Seals: Up to 6.4 HP: For standard pumps, Tungsten Carbide vs. Ceramic seal faces standard on outer seals. Carbon vs. Ceramic standard on inner seals. Over 6.4 HP: Tungsten Carbide vs. Tungsten Carbide faces standard on outer seals. Tungsten Carbide vs. Carbon standard on inner seals. All elastomers shall be nitrile. For All Explosion Proof: Tungsten Carbide vs. Ceramic faces standard on outer and inner seals. All elastomers shall be viton. Seal Sensor / High Temperature Probe: Located in motor housing. If pumpage should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires MiniCAS device in the control panel. Capable of running dry without damage to components. Designed for continuous operation, when fully submerged. Explosion-proof available as option. FM approved. Shaft: Corrosion resistant, 400 series stainless steel. Taper lock and impeller bolt on all models to guard against component damage on accidental reverse rotation. Fasteners: 300 series stainless steel. Grease for life bearings APPLICATIONS Specifically designed for the following uses: Sewage systems Dewatering/Effluent Water transfer Light industrial Commercial applications Anywhere waste or drainage must be disposed of quickly, quietly and efficiently. SPECIFICATIONS Pump: Maximum soft solid size: 2 1/2" Capacities: up to 575 GPM Total heads: up to 152' TDH Discharge size: 3" ANSI Flange Motor: Maximum ambient temperature: 104 F (40 C) continuous duty Rated for continuous duty when fully submerged Insulation: Class H 60 Hertz Single row ball bearings 400 Series stainless steel taper lock shaft Requires external motor components for single phase (not included) Requires overload protection in panel (not included) Includes high temperature sensor for winding protection AIR-FILLED MOTOR Efficient heat dissipation Run dry capability Class H insulation Designed for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits and can be operated continuously without damage when fully submerged. Bearings: Upper and lower heavy duty ball bearing construction for precision positioning of parts and to carry thrust loads. High temperature winding protection Cord: Severe duty rated, oil and water resistant. 30 foot standard. O-ring: Assures positive sealing against contaminants and oil leakage.