Goulds GT301TE Self Priming Irrigation Pump 3HP 230V 1 Phase

Goulds GT301TE Self Priming Irrigation Pump 3HP 230V 1 Phase Goulds GT301TE, 3 HP, 230 Volts, 1 Phase with TEFC Enclosure FEATURES Self-Priming Design: Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe. Serviceable: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance. Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant. Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on. Casing: Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain. Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage. Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry. APPLICATIONS Specifically designed for the following uses: Lawn sprinkling Irrigation Air conditioning systems Heat pumps Water transfer Dewatering SPECIFICATIONS Pump: Pipe connections: 1-1/2" NPT suction 1-1/2" NPT discharge Capacities: to 110 GPM at 5 foot suction lift Heads: to 128 feet Reprime capabilities: to 25 feet suction lift Maximum working pressure: 125 PSIG Maximum water temperature: 140 F (60 C) Rotation: clockwise when viewed from motor end. Motor: NEMA standard open drip proof 60 Hz, 3500 RPM Stainless steel shaft Single phase: 3/4–1 1/2 HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset. Three phase: 230/460 V. Overload protection must be provided in starter unit. Starter and heaters (3) must be ordered separately. Optional TEFC motors are available