Goulds A2X13 FS-MAM 10' Bare

Goulds A2X13, FS-MAM, 10', Bare. MilliAmpMaster™ Mechanical Float Switch Features • Mechanically activated, snap-action, sealed gold cross-point contacts are designed to activate low current control panels and alarms. • Narrow angle Control for Low Voltage AC or DC applications. • Operate with differential of 45º above or below horizontal. • Electrical Load – low current non-arcing applications • 125 VAC – Max. Load .1 amps (Min. Load .16 milliamps) • 30 VDC – Max. Load .1 amps (Min.Load .16 milliamps) • 5 VDC - Minimum Load 1 milliamp • UL Listed for use in non-potable water and sewage. • CSA Certified • Mounting clamp for attaching to discharge pipe is standard. • Not sensitive to rotation. • Maximum submergence or water depth, 30' (9 meters), 13 psi. • Flexible 18 gauge, 2 conductor SJOW water resistant cable. • Impact and corrosion resistant, polypropylene float housing for use in sewage and water up to 140 º F. • Use with Intrinsically Safe Barriers (as used with explosion proof pumps), PLC’s, solar applications and other low current control panel or alarm applications. • Cable lengths of 10', 20' and 30'. • Standard order numbers are for Normally Open (NO) switches. • Normally Closed (NC) or Pump Down switches are available as a special order by adding a ”U” suffix. See Nomenclature on last page. • Float comes with blue cap for easy identification.