{"title":"Packaged Systems","description":null,"products":[{"product_id":"goulds-5gp2020-30-60-hertz-propak-kits-2-hp","title":"Goulds 5GP2020 AquaVar ProPak Variable-Frequency Pump Kit – 2 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds 5GP2020 AquaVar ProPak is a factory-matched, 2 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 5GS20 submersible water end, a M20432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 5GS20 water end covers a performance envelope bounded by a maximum shut-off head of 1060 ft at 0 GPM, a manufacturer-rated best-efficiency point of 5 GPM at 740 ft TDH, and a maximum runout of 7.5 GPM at 440 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 5GS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M20432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 1060 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 5 GPM at 740 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 7.5 GPM at 440 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 6.5 A (1990 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 7.6 A (2450 W), SF 1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 44 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.8-2.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 6100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 72 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 2 gal total volume (V6P or TP6P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, three-phase, 230V (M20432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 5GS20 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221317888,"sku":"5GP2020","price":2952.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak.jpg?v=1780611328"},{"product_id":"goulds-7gp0715-30-80-hertz-propak-kits-1-5-hp","title":"Goulds 7GP0715 AquaVar ProPak Variable-Frequency Pump Kit – 1.5 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003eThe Goulds 7GP0715 AquaVar ProPak is a factory-matched, 1.5 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 7GS07 submersible water end, a M15432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 7GS07 water end covers a performance envelope bounded by a maximum shut-off head of 665 ft at 0 GPM, a manufacturer-rated best-efficiency point of 7 GPM at 480 ft TDH, and a maximum runout of 16 GPM at 110 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 1.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 7GS07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M15432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 665 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 7 GPM at 480 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 16 GPM at 110 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.1 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 5.2 A (1490 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 6.1 A (1930 W), SF 1.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 32.4 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 2.8-3.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 20 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 4400 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 56 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 4.5 gal total volume (V15P or TP15P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.5 HP, three-phase, 230V (M15432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 7GS07 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221350656,"sku":"7GP0715","price":2813.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_04e65a09-ad93-4a44-ba04-15e495e9a9bd.jpg?v=1780611329"},{"product_id":"goulds-7gp1020-30-80-hertz-propak-kits-2hp","title":"Goulds 7GP1020 AquaVar ProPak Variable-Frequency Pump Kit – 2 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003eThe Goulds 7GP1020 AquaVar ProPak is a factory-matched, 2 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 7GS10 submersible water end, a M20432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 7GS10 water end covers a performance envelope bounded by a maximum shut-off head of 880 ft at 0 GPM, a manufacturer-rated best-efficiency point of 7 GPM at 640 ft TDH, and a maximum runout of 16 GPM at 146 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 7GS10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M20432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 880 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 7 GPM at 640 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 16 GPM at 146 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 6.5 A (1990 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 7.6 A (2450 W), SF 1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 44 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.8-2.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 6100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 62 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 4.5 gal total volume (V15P or TP15P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, three-phase, 230V (M20432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 7GS10 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221416192,"sku":"7GP1020","price":2960.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_58b6d869-afe4-4e5a-86d6-4203c5326831.jpg?v=1780611332"},{"product_id":"goulds-7gp1530-30-80-hertz-propak-kits-3hp","title":"Goulds 7GP1530 AquaVar ProPak Variable-Frequency Pump Kit – 3 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds 7GP1530 AquaVar ProPak is a factory-matched, 3 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 7GS15 submersible water end, a M30432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 7GS15 water end covers a performance envelope bounded by a maximum shut-off head of 1140 ft at 0 GPM, a manufacturer-rated best-efficiency point of 7 GPM at 820 ft TDH, and a maximum runout of 16 GPM at 175 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 7GS15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M30432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 1140 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 7 GPM at 820 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 16 GPM at 175 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 2.2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 9.2 A (2880 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 10.1 A (3280 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 58.9 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.3-1.7 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 8100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 70 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 4.5 gal total volume (V15P or TP15P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP, three-phase, 230V (M30432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS30)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 7GS15 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221448960,"sku":"7GP1530","price":3506.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_6a281f8a-d49f-43ee-aa1c-f2cd42f68e4f.jpg?v=1780611334"},{"product_id":"goulds-10gp0715-30-80-hertz-propak-kits-1-5hp","title":"Goulds 10GP0715 AquaVar ProPak Variable-Frequency Pump Kit – 1.5 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003eThe Goulds 10GP0715 AquaVar ProPak is a factory-matched, 1.5 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 10GS07 submersible water end, a M15432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 10GS07 water end covers a performance envelope bounded by a maximum shut-off head of 540 ft at 0 GPM, a manufacturer-rated best-efficiency point of 10 GPM at 438 ft TDH, and a maximum runout of 20 GPM at 117 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 1.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 10GS07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M15432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 540 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 10 GPM at 438 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 20 GPM at 117 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.1 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 5.2 A (1490 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 6.1 A (1930 W), SF 1.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 32.4 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 2.8-3.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 20 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 4400 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 56 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 4.5 gal total volume (V15P or TP15P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.5 HP, three-phase, 230V (M15432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 10GS07 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221481728,"sku":"10GP0715","price":2813.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_6bf5b1b1-4a76-45d5-bdd6-de9cb82ffa5a.jpg?v=1780611336"},{"product_id":"goulds-10gp1020-30-80-hertz-propak-kits-2hp","title":"Goulds 10GP1020 AquaVar ProPak Variable-Frequency Pump Kit – 2 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003eThe Goulds 10GP1020 AquaVar ProPak is a factory-matched, 2 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 10GS10 submersible water end, a M20432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 10GS10 water end covers a performance envelope bounded by a maximum shut-off head of 660 ft at 0 GPM, a manufacturer-rated best-efficiency point of 10 GPM at 488 ft TDH, and a maximum runout of 20 GPM at 160 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 10GS10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M20432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 660 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 10 GPM at 488 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 20 GPM at 160 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 6.5 A (1990 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 7.6 A (2450 W), SF 1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 44 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.8-2.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 6100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 62 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 4.5 gal total volume (V15P or TP15P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, three-phase, 230V (M20432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 10GS10 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221514496,"sku":"10GP1020","price":2813.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_410e1e6a-fb1a-4915-b67f-40ccb5dc59f4.jpg?v=1780611338"},{"product_id":"goulds-10gp1530-30-80-hertz-propak-kits-3hp","title":"Goulds 10GP1530 AquaVar ProPak Variable-Frequency Pump Kit – 3 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds 10GP1530 AquaVar ProPak is a factory-matched, 3 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 10GS15 submersible water end, a M30432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 10GS15 water end covers a performance envelope bounded by a maximum shut-off head of 923 ft at 0 GPM, a manufacturer-rated best-efficiency point of 10 GPM at 650 ft TDH, and a maximum runout of 20 GPM at 205 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 10GS15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M30432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 923 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 10 GPM at 650 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 20 GPM at 205 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 2.2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 9.2 A (2880 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 10.1 A (3280 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 58.9 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.3-1.7 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 8100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 70 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 4.5 gal total volume (V15P or TP15P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP, three-phase, 230V (M30432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS30)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 10GS15 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221547264,"sku":"10GP1530","price":3506.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_644bafea-b7da-4752-8304-d816c185d102.jpg?v=1780611339"},{"product_id":"goulds-18gp0715-30-80-hertz-propak-kits-1-5hp","title":"Goulds 18GP0715 AquaVar ProPak Variable-Frequency Pump Kit – 1.5 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003eThe Goulds 18GP0715 AquaVar ProPak is a factory-matched, 1.5 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 18GS07 submersible water end, a M15432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 18GS07 water end covers a performance envelope bounded by a maximum shut-off head of 315 ft at 0 GPM, a manufacturer-rated best-efficiency point of 18 GPM at 237 ft TDH, and a maximum runout of 37 GPM at 55 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 1.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 18GS07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M15432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 315 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 18 GPM at 237 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 37 GPM at 55 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.1 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 5.2 A (1490 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 6.1 A (1930 W), SF 1.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 32.4 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 2.8-3.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 20 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 4400 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 55 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.5 HP, three-phase, 230V (M15432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 18GS07 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221580032,"sku":"18GP0715","price":2813.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_6968dc15-a0b2-4ce1-a8b2-cfdb6583fb6e.jpg?v=1780611341"},{"product_id":"goulds-18gp1020-30-80-hertz-propak-kits-2hp","title":"Goulds 18GP1020 AquaVar ProPak Variable-Frequency Pump Kit – 2 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003eThe Goulds 18GP1020 AquaVar ProPak is a factory-matched, 2 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 18GS10 submersible water end, a M20432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 18GS10 water end covers a performance envelope bounded by a maximum shut-off head of 428 ft at 0 GPM, a manufacturer-rated best-efficiency point of 18 GPM at 306 ft TDH, and a maximum runout of 37 GPM at 70 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 18GS10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M20432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 428 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 18 GPM at 306 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 37 GPM at 70 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 6.5 A (1990 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 7.6 A (2450 W), SF 1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 44 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.8-2.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 6100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 61 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, three-phase, 230V (M20432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 18GS10 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221612800,"sku":"18GP1020","price":2813.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_3f1adfa6-c60a-4359-a622-d90c1fed7831.jpg?v=1780611343"},{"product_id":"goulds-18gp1530-30-80-hertz-propak-kits-3hp","title":"Goulds 18GP1530 AquaVar ProPak Variable-Frequency Pump Kit – 3 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003eThe Goulds 18GP1530 AquaVar ProPak is a factory-matched, 3 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 18GS15 submersible water end, a M30432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 18GS15 water end covers a performance envelope bounded by a maximum shut-off head of 582 ft at 0 GPM, a manufacturer-rated best-efficiency point of 18 GPM at 420 ft TDH, and a maximum runout of 37 GPM at 87 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 18GS15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M30432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 582 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 18 GPM at 420 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 37 GPM at 87 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 2.2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 9.2 A (2880 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 10.1 A (3280 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 58.9 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.3-1.7 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 8100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 68 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP, three-phase, 230V (M30432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS30)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 18GS15 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221678336,"sku":"18GP1530","price":4119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_8a3b978c-d880-44d9-ac68-13bbb53eaad4.jpg?v=1780611344"},{"product_id":"goulds-18gp3050-30-80-hertz-propak-kits-5hp","title":"Goulds 18GP3050 AquaVar ProPak Variable-Frequency Pump Kit – 5 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds 18GP3050 AquaVar ProPak is a factory-matched, 5 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 18GS30 submersible water end, a M50432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 18GS30 water end covers a performance envelope bounded by a maximum shut-off head of 990 ft at 0 GPM, a manufacturer-rated best-efficiency point of 18 GPM at 680 ft TDH, and a maximum runout of 37 GPM at 140 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 18GS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M50432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 990 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 18 GPM at 680 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 37 GPM at 140 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 3.7 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 15.7 A (4925 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 17.5 A (5650 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 93 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 0.85-1.25 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 40 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 13300 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 101 lbs (2 cartons -- motor ships separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5 HP, three-phase, 230V (M50432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS50)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 18GS30 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221711104,"sku":"18GP3050","price":5029.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_e589f635-2acd-43d6-a32a-2cb8089baa52.jpg?v=1780611346"},{"product_id":"goulds-25gp1020-30-80-hertz-propak-kits-2hp","title":"Goulds 25GP1020 AquaVar ProPak Variable-Frequency Pump Kit – 2 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003eThe Goulds 25GP1020 AquaVar ProPak is a factory-matched, 2 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 25GS10 submersible water end, a M20432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 25GS10 water end covers a performance envelope bounded by a maximum shut-off head of 358 ft at 0 GPM, a manufacturer-rated best-efficiency point of 25 GPM at 238 ft TDH, and a maximum runout of 40 GPM at 69 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 25GS10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M20432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 358 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 25 GPM at 238 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 40 GPM at 69 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 6.5 A (1990 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 7.6 A (2450 W), SF 1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 44 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.8-2.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 6100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 61 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, three-phase, 230V (M20432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 25GS10 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221776640,"sku":"25GP1020","price":2813.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_79787ec3-76f1-4074-8a6d-b3c031d278a2.jpg?v=1780611348"},{"product_id":"goulds-25gp1530-30-80-hertz-propak-kits-3hp","title":"Goulds 25GP1530 AquaVar ProPak Variable-Frequency Pump Kit – 3 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds 25GP1530 AquaVar ProPak is a factory-matched, 3 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 25GS15 submersible water end, a M30432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 25GS15 water end covers a performance envelope bounded by a maximum shut-off head of 466 ft at 0 GPM, a manufacturer-rated best-efficiency point of 25 GPM at 317 ft TDH, and a maximum runout of 40 GPM at 100 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 25GS15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M30432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 466 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 25 GPM at 317 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 40 GPM at 100 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 2.2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 9.2 A (2880 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 10.1 A (3280 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 58.9 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.3-1.7 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 8100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 67 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP, three-phase, 230V (M30432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS30)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 25GS15 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799221973248,"sku":"25GP1530","price":3506.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_f3d910dc-f669-4db9-ba3b-a232d01947eb.jpg?v=1780611350"},{"product_id":"goulds-25gp3050-30-80-hertz-propak-kits-5hp","title":"Goulds 25GP3050 AquaVar ProPak Variable-Frequency Pump Kit – 5 HP, Three Phase, 230V, 30-80 Hz","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds 25GP3050 AquaVar ProPak is a factory-matched, 5 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 25GS30 submersible water end, a M50432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 80 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 25GS30 water end covers a performance envelope bounded by a maximum shut-off head of 770 ft at 0 GPM, a manufacturer-rated best-efficiency point of 25 GPM at 528 ft TDH, and a maximum runout of 40 GPM at 158 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-80 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 25GS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M50432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 770 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 25 GPM at 528 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 40 GPM at 158 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 3.7 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 15.7 A (4925 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 17.5 A (5650 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 93 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 0.85-1.25 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 40 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 13300 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 100 lbs (2 cartons -- motor ships separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5 HP, three-phase, 230V (M50432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS50)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 25GS30 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222006016,"sku":"25GP3050","price":5029.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_e01dedf1-49c2-4efb-89b6-c710a2261978.jpg?v=1780611351"},{"product_id":"goulds-7gp1515-30-60-hertz-propak-kits-1-5-hp","title":"Goulds 7GP1515 AquaVar ProPak Variable-Frequency Pump Kit – 1.5 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds 7GP1515 AquaVar ProPak is a factory-matched, 1.5 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 7GS15 submersible water end, a M15432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 7GS15 water end covers a performance envelope bounded by a maximum shut-off head of 688 ft at 0 GPM, a manufacturer-rated best-efficiency point of 7 GPM at 538 ft TDH, and a maximum runout of 10 GPM at 386 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 1.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 7GS15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M15432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 688 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 7 GPM at 538 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 10 GPM at 386 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.1 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 5.2 A (1490 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 6.1 A (1930 W), SF 1.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 32.4 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 2.8-3.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 20 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 4400 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 60 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 2 gal total volume (V6P or TP6P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.5 HP, three-phase, 230V (M15432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 7GS15 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222104320,"sku":"7GP1515","price":2367.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_952fa149-7ee0-4665-9827-bec3613fc829.jpg?v=1780611356"},{"product_id":"goulds-7gp2020-30-60-hertz-propak-kits-2-hp","title":"Goulds 7GP2020 AquaVar ProPak Variable-Frequency Pump Kit – 2 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds 7GP2020 AquaVar ProPak is a factory-matched, 2 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 7GS20 submersible water end, a M20432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 7GS20 water end covers a performance envelope bounded by a maximum shut-off head of 959 ft at 0 GPM, a manufacturer-rated best-efficiency point of 7 GPM at 701 ft TDH, and a maximum runout of 10 GPM at 480 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 7GS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M20432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 959 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 7 GPM at 701 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 10 GPM at 480 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 6.5 A (1990 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 7.6 A (2450 W), SF 1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 44 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.8-2.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 6100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 66 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 2 gal total volume (V6P or TP6P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, three-phase, 230V (M20432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 7GS20 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222137088,"sku":"7GP2020","price":2677.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_5682f3cc-cfa3-4958-8ce7-5403d4351f44.jpg?v=1780611358"},{"product_id":"goulds-7gp3030-30-60-hertz-propak-kits-3-hp","title":"Goulds 7GP3030 AquaVar ProPak Variable-Frequency Pump Kit – 3 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds 7GP3030 AquaVar ProPak is a factory-matched, 3 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 7GS30 submersible water end, a M30432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 7GS30 water end covers a performance envelope bounded by a maximum shut-off head of 1200 ft at 0 GPM, a manufacturer-rated best-efficiency point of 7 GPM at 890 ft TDH, and a maximum runout of 10 GPM at 615 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 7GS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M30432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 1200 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 7 GPM at 890 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 10 GPM at 615 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 2.2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 9.2 A (2880 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 10.1 A (3280 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 58.9 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.3-1.7 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 8100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 76 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 2 gal total volume (V6P or TP6P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP, three-phase, 230V (M30432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS30)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 7GS30 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222169856,"sku":"7GP3030","price":4016.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_2d3c1b70-271e-4334-aecc-36c15d850abc.jpg?v=1780611359"},{"product_id":"goulds-10gp1515-30-60-hertz-propak-kits-1-5-hp","title":"Goulds 10GP1515 AquaVar ProPak Variable-Frequency Pump Kit – 1.5 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003eThe Goulds 10GP1515 AquaVar ProPak is a factory-matched, 1.5 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 10GS15 submersible water end, a M15432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 10GS15 water end covers a performance envelope bounded by a maximum shut-off head of 555 ft at 0 GPM, a manufacturer-rated best-efficiency point of 10 GPM at 440 ft TDH, and a maximum runout of 16 GPM at 239 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 1.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 10GS15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M15432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 555 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 10 GPM at 440 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 16 GPM at 239 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.1 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 5.2 A (1490 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 6.1 A (1930 W), SF 1.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 32.4 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 2.8-3.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 20 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 4400 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 60 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 4.5 gal total volume (V15P or TP15P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.5 HP, three-phase, 230V (M15432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 10GS15 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222202624,"sku":"10GP1515","price":2928.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_25dd583e-2cf0-4931-9f36-24920a9e36a7.jpg?v=1780611361"},{"product_id":"goulds-10gp2020-30-60-hertz-propak-kits-2-hp","title":"Goulds 10GP2020 AquaVar ProPak Variable-Frequency Pump Kit – 2 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003eThe Goulds 10GP2020 AquaVar ProPak is a factory-matched, 2 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 10GS20 submersible water end, a M20432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 10GS20 water end covers a performance envelope bounded by a maximum shut-off head of 660 ft at 0 GPM, a manufacturer-rated best-efficiency point of 10 GPM at 546 ft TDH, and a maximum runout of 16 GPM at 287 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 10GS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M20432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 660 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 10 GPM at 546 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 16 GPM at 287 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 6.5 A (1990 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 7.6 A (2450 W), SF 1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 44 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.8-2.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 6100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 66 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 4.5 gal total volume (V15P or TP15P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, three-phase, 230V (M20432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 10GS20 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222235392,"sku":"10GP2020","price":2960.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_7fc453f4-ac58-4ae0-95ec-e7ff6257661a.jpg?v=1780611363"},{"product_id":"goulds-10gp3030-30-60-hertz-propak-kits-3-hp","title":"Goulds 10GP3030 AquaVar ProPak Variable-Frequency Pump Kit – 3 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003eThe Goulds 10GP3030 AquaVar ProPak is a factory-matched, 3 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 10GS30 submersible water end, a M30432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 10GS30 water end covers a performance envelope bounded by a maximum shut-off head of 876 ft at 0 GPM, a manufacturer-rated best-efficiency point of 10 GPM at 700 ft TDH, and a maximum runout of 16 GPM at 368 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 10GS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M30432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 876 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 10 GPM at 700 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 16 GPM at 368 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 2.2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 9.2 A (2880 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 10.1 A (3280 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 58.9 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.3-1.7 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 8100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 76 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 4.5 gal total volume (V15P or TP15P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP, three-phase, 230V (M30432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS30)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 10GS30 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222268160,"sku":"10GP3030","price":5111.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_258cce0f-481d-4229-9efd-0fad0f87ac6a.jpg?v=1780611365"},{"product_id":"goulds-13gp3030-30-60-hertz-propak-kits-3-hp","title":"Goulds 13GP3030 AquaVar ProPak Variable-Frequency Pump Kit – 3 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003eThe Goulds 13GP3030 AquaVar ProPak is a factory-matched, 3 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 13GS30 submersible water end, a M30432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 13GS30 water end covers a performance envelope bounded by a maximum shut-off head of 662 ft at 0 GPM, a manufacturer-rated best-efficiency point of 13 GPM at 519 ft TDH, and a maximum runout of 20 GPM at 250 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 13GS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M30432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 662 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 13 GPM at 519 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 20 GPM at 250 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 2.2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 9.2 A (2880 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 10.1 A (3280 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 58.9 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.3-1.7 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 8100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 73 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 4.5 gal total volume (V15P or TP15P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP, three-phase, 230V (M30432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS30)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 13GS30 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222300928,"sku":"13GP3030","price":4830.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_39822829-c602-48e0-b07b-4e3fe93e275b.jpg?v=1780611366"},{"product_id":"goulds-18gp1515-30-60-hertz-propak-kits-1-5-hp","title":"Goulds 18GP1515 AquaVar ProPak Variable-Frequency Pump Kit – 1.5 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003eThe Goulds 18GP1515 AquaVar ProPak is a factory-matched, 1.5 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 18GS15 submersible water end, a M15432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 18GS15 water end covers a performance envelope bounded by a maximum shut-off head of 348 ft at 0 GPM, a manufacturer-rated best-efficiency point of 18 GPM at 255 ft TDH, and a maximum runout of 28 GPM at 126 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 1.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 18GS15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M15432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 348 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 18 GPM at 255 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 28 GPM at 126 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.1 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 5.2 A (1490 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 6.1 A (1930 W), SF 1.3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 32.4 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 2.8-3.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 20 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 4400 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 58 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1.5 HP, three-phase, 230V (M15432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 18GS15 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222333696,"sku":"18GP1515","price":2847.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_f16b8dc8-84f6-42e8-b167-d990e8a449d7.jpg?v=1780611368"},{"product_id":"goulds-18gp2020-30-60-hertz-propak-kits-2-hp","title":"Goulds 18GP2020 AquaVar ProPak Variable-Frequency Pump Kit – 2 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003eThe Goulds 18GP2020 AquaVar ProPak is a factory-matched, 2 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 18GS20 submersible water end, a M20432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 18GS20 water end covers a performance envelope bounded by a maximum shut-off head of 444 ft at 0 GPM, a manufacturer-rated best-efficiency point of 18 GPM at 324 ft TDH, and a maximum runout of 28 GPM at 160 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 18GS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M20432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 444 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 18 GPM at 324 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 28 GPM at 160 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 6.5 A (1990 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 7.6 A (2450 W), SF 1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 44 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.8-2.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 6100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 64 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, three-phase, 230V (M20432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 18GS20 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222366464,"sku":"18GP2020","price":3051.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_21781d7b-a700-471a-a26e-92ca51c17cc1.jpg?v=1780611370"},{"product_id":"goulds-18gp3030-30-60-hertz-propak-kits-3-hp","title":"Goulds 18GP3030 AquaVar ProPak Variable-Frequency Pump Kit – 3 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003eThe Goulds 18GP3030 AquaVar ProPak is a factory-matched, 3 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 18GS30 submersible water end, a M30432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 18GS30 water end covers a performance envelope bounded by a maximum shut-off head of 605 ft at 0 GPM, a manufacturer-rated best-efficiency point of 18 GPM at 422 ft TDH, and a maximum runout of 28 GPM at 215 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 18GS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M30432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 605 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 18 GPM at 422 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 28 GPM at 215 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 2.2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 9.2 A (2880 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 10.1 A (3280 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 58.9 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.3-1.7 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 8100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 73 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP, three-phase, 230V (M30432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS30)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 18GS30 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222432000,"sku":"18GP3030","price":4505.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_a8a1e10c-1a8d-4acc-9781-4dee2be23d2a.jpg?v=1780611371"},{"product_id":"goulds-18gp5050-30-60-hertz-propak-kits-5-hp","title":"Goulds 18GP5050 AquaVar ProPak Variable-Frequency Pump Kit – 5 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds 18GP5050 AquaVar ProPak is a factory-matched, 5 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 18GS50 submersible water end, a M50432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 18GS50 water end covers a performance envelope bounded by a maximum shut-off head of 960 ft at 0 GPM, a manufacturer-rated best-efficiency point of 18 GPM at 712 ft TDH, and a maximum runout of 28 GPM at 365 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 18GS50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M50432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 960 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 18 GPM at 712 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 28 GPM at 365 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 3.7 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 15.7 A (4925 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 17.5 A (5650 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 93 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 0.85-1.25 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 40 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 13300 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 107 lbs (2 cartons -- motor ships separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5 HP, three-phase, 230V (M50432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS50)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 18GS50 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222530304,"sku":"18GP5050","price":5245.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_39c03b79-a093-46c1-81a7-2442002c5eeb.jpg?v=1780611377"},{"product_id":"goulds-25gp2020-30-60-hertz-propak-kits-2-hp","title":"Goulds 25GP2020 AquaVar ProPak Variable-Frequency Pump Kit – 2 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003eThe Goulds 25GP2020 AquaVar ProPak is a factory-matched, 2 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 25GS20 submersible water end, a M20432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 25GS20 water end covers a performance envelope bounded by a maximum shut-off head of 340 ft at 0 GPM, a manufacturer-rated best-efficiency point of 25 GPM at 227 ft TDH, and a maximum runout of 33 GPM at 120 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 25GS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M20432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 340 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 25 GPM at 227 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 33 GPM at 120 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 6.5 A (1990 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 7.6 A (2450 W), SF 1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 44 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 1.8-2.4 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 6100 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 63 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2 HP, three-phase, 230V (M20432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS20)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 25GS20 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222563072,"sku":"25GP2020","price":3028.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_d3e2963a-b360-4410-99d8-2a272f999d74.jpg?v=1780611375"},{"product_id":"goulds-25gp5050-30-60-hertz-propak-kits-5-hp","title":"Goulds 25GP5050 AquaVar ProPak Variable-Frequency Pump Kit – 5 HP, Three Phase, 230V, 30-60 Hz","description":"\u003cp\u003eThe Goulds 25GP5050 AquaVar ProPak is a factory-matched, 5 HP, three-phase, 230V variable-frequency pump kit built around a Goulds 25GS50 submersible water end, a M50432 motor, and a CentriPro Aquavar SOLO² controller with transducer. Because the SOLO² drive continuously varies motor frequency from 30 to 60 Hz to hold a constant discharge pressure, this kit does not run at one fixed duty point -- across its frequency range the 25GS50 water end covers a performance envelope bounded by a maximum shut-off head of 800 ft at 0 GPM, a manufacturer-rated best-efficiency point of 25 GPM at 525 ft TDH, and a maximum runout of 33 GPM at 280 ft TDH, with the actual operating point set automatically by well depth and system demand. The controller ships factory preset to 60 PSI discharge pressure, field-adjustable to higher settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 30-60 Hz (VFD, variable duty point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Model:\u003c\/strong\u003e 25GS50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e M50432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Model:\u003c\/strong\u003e 3AS50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShut-Off Head (0 GPM):\u003c\/strong\u003e 800 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-Efficiency Point (mfr. rated):\u003c\/strong\u003e 25 GPM at 525 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Runout:\u003c\/strong\u003e 33 GPM at 280 ft TDH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Output:\u003c\/strong\u003e 3.7 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 15.7 A (4925 W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor Amps:\u003c\/strong\u003e 17.5 A (5650 W), SF 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocked Rotor Amps:\u003c\/strong\u003e 93 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-to-Line Resistance:\u003c\/strong\u003e 0.85-1.25 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Circuit Breaker:\u003c\/strong\u003e 40 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Generator Size:\u003c\/strong\u003e 13300 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Dimensions:\u003c\/strong\u003e Height 21\", Width 13\", Depth 8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Shipping Weight:\u003c\/strong\u003e 107 lbs (2 cartons -- motor ships separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Pressure Tank (order separately):\u003c\/strong\u003e 8.2 gal total volume (V25P or TP25P)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End Bearings:\u003c\/strong\u003e Guardian bearing system with field-proven floating stack design for sand and abrasive handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Interface:\u003c\/strong\u003e Aquavar SOLO² user interface board with switch connection for optional pressure or level switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-Run Protection:\u003c\/strong\u003e Dry well sensitivity switch and low pressure cut-off protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestart Behavior:\u003c\/strong\u003e 5 or 20 PSI pressure-drop restart switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Transducer protected from transient power surges; current limit settings matched to Goulds Water Technology motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Standard three-wire control box: L1, L2, and Ground in from power supply; Red, Yellow, Black, and Ground out to motor. Three-phase output to motor reduces wire cost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5 HP, three-phase, 230V (M50432)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e CentriPro Aquavar SOLO² with transducer (3AS50)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater End:\u003c\/strong\u003e Goulds 25GS50 submersible pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Pressure tank -- order separately, sized to the kit's maximum flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light commercial constant-pressure well water systems, variable-speed submersible booster duty, and deep-well or variable-demand installations that benefit from a wide, VFD-adjustable flow and pressure range rather than a single fixed duty point.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799222595840,"sku":"25GP5050","price":6644.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/goulds-propak_1f9b3c29-4dbc-46ae-a8c6-f885aad12c95.jpg?v=1780611377"},{"product_id":"goulds-33gp5050-30-60-hertz-propak-kits-5-hp","title":"Goulds 33GP5050 30-60 Hertz Propak Kits 5 HP","description":"\u003cp\u003eGoulds 33GP5050 30-60 Hertz Propak Kits 5 Horse Power. KIT CONTAINS 3AS50, M50432, \u0026amp; 33GP50.  AQUAVAR Kits Kits include: • CentriPro Three Phase Motor 1.5 – 5 HP, 230 V • CentriPro Aquavar SOLO™ Controller with Transducer • Goulds Pumps GS Water End (pump) • Kits available for: • 30-60 Hz Operation – BGPROPAK60 • 30-80 Hz Operation – BGPROPAK80 ProPak Features: • Simple, fast sizing and installation. • Three phase output to motor reduces wire cost. • Range curves and selection charts generated from actual R\u0026amp;D tests. • Goulds model GS features the Guardian bearing system and field proven sand and • Kits configured for either 30-60 or 30-80 Hz abrasive handling floating stack design. maximum operation. • Switch Input for connecting a pressure switch • Wiring is as easy as standard three-wire or float switch. control box: • Grounding provisions for transducer and • L1, L2 and Ground in from power supply transducer cable. • Red, Yellow, Black and Ground out to motor ProPak kits do not include pressure tanks, • Pressure is factory preset at 50 psi with order tanks separately. simple, fast, field adjustability for higher pressures. Aquavar SOLO Controller Transducer Features: Features: • Large port orifice to prevent clogging New, more versatile user interface board • Case to electronics surge protection • Provides switch connection for optional • All Stainless Steel construction pressure or level switch • Pressure surge capability without the use • New current limit settings for all new of a pressure snubber CentriPro motors • Case coupled noise immunity • Dry well sensitivity switch • Reverse voltage protection • Low pressure cut-off protection • Line to electronics ground surge protection • 5 or 20 PSI pressure drop restart switch on all lines • Transducer better protected from transient • Transducer cable has ground wire built-in power surges • Ground clamp provided for transducer to cable grounding\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49542543737088,"sku":"33GP5050","price":7130.92,"currency_code":"USD","in_stock":true}]},{"product_id":"goulds-gwp2113-lift-station-18x30-basin-w-ps51av-pump","title":"Goulds GWP2113 Lift Station 18\"x30\" Basin w\/PS51AV Pump","description":"\u003cp\u003eGWP2113 Package, includes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-Goulds PS51AV Sewage Pump\u003c\/li\u003e\n\u003cli\u003e115V, 2\" Solids\u003c\/li\u003e\n\u003cli\u003eT-spliced vertical Float Switch\u003c\/li\u003e\n\u003cli\u003e10' Cord -23\" x 30\" Ribbed Polyethylene Basin\u003c\/li\u003e\n\u003cli\u003e4\" Slip type Inlet Hub and Pump Torque Stop Insert - 18\" Structural Foam Cover with Bolts - Sealing Tape - (2) 2\" vent and discharge grommets - 3\" Vent and Discharge Grommets - Check Valve: A9-2PH 2\" Rubber Sleeve Type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe\u003c\/p\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eSpecially designed for the following uses:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e- Homes\u003c\/li\u003e\n\u003cli\u003erural water districts\u003c\/li\u003e\n\u003cli\u003eparks and dewatering - Wastewater containing solids up to 2\" - Sewage lift station - Anywhere waste or drainage must be disposed of quickly\u003c\/li\u003e\n\u003cli\u003equietly and efficiently - Waste drainage in new additions below sewer line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRibbed Basin Packages with Pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003eRibbed polyethylene basin for strength and durability. - Eight (8) bolt structural foam cover is strong and corrosion resistant. - Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. - Inlet Hub is a molded-in, slip-fit type for fast, easy connection using flexible, slip-fit connectors and clamps (not included). - Fully assembled at the factory. - Vent, discharge and cord holes all pre-drilled. - Torque stop insert to stabilize the pump. - Swing type 2\" check valve: A9-2PH rubber sleeve type or A9-2P compression type - Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cp\u003e23 x 30Ã?'¢â‚¬Â Basin: - Ribbed polyethylene - Usable capacity: 24.8 gal. - Dimensions: 23\" w x 30\" h - Inlet: 4\" slip fit hub for fast, easy connection\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564763586816,"sku":"GWP2113","price":986.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_fa511f8c-ab05-40ce-adb3-9e47218a722d.jpg?v=1787952344"},{"product_id":"goulds-gwp2114-lift-station-18x30-basin-w-ps51a1-pump","title":"Goulds GWP2114 Lift Station 18\"x30\" Basin w\/PS51A1 Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGWP2113 Package, includes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-Goulds PS51AV Sewage Pump\u003c\/li\u003e\n\u003cli\u003e115V, 2\" Solids\u003c\/li\u003e\n\u003cli\u003eT-spliced vertical Float Switch\u003c\/li\u003e\n\u003cli\u003e10' Cord -23\" x 30\" Ribbed Polyethylene Basin\u003c\/li\u003e\n\u003cli\u003e4\" Slip type Inlet Hub and Pump Torque Stop Insert - 18\" Structural Foam Cover with Bolts - Sealing Tape - (2) 2\" vent and discharge grommets - 3\" Vent and Discharge Grommets - Check Valve: A9-2PH 2\" Rubber Sleeve Type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe\u003c\/p\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eSpecially designed for the following uses:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e- Homes\u003c\/li\u003e\n\u003cli\u003erural water districts\u003c\/li\u003e\n\u003cli\u003eparks and dewatering - Wastewater containing solids up to 2\" - Sewage lift station - Anywhere waste or drainage must be disposed of quickly\u003c\/li\u003e\n\u003cli\u003equietly and efficiently - Waste drainage in new additions below sewer line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRibbed Basin Packages with Pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003eRibbed polyethylene basin for strength and durability. - Eight (8) bolt structural foam cover is strong and corrosion resistant. - Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. - Inlet Hub is a molded-in, slip-fit type for fast, easy connection using flexible, slip-fit connectors and clamps (not included). - Fully assembled at the factory. - Vent, discharge and cord holes all pre-drilled. - Torque stop insert to stabilize the pump. - Swing type 2\" check valve: A9-2PH rubber sleeve type or A9-2P compression type - Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cp\u003e23 x 30\" Basin: - Ribbed polyethylene - Usable capacity: 24.8 gal. - Dimensions: 23\" w x 30\" h - Inlet: 4\" slip fit hub for fast, easy connection\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564763685120,"sku":"GWP2114","price":830.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_cc6cceb8-1d84-4243-a97b-83cfa4959efc.jpg?v=1787952346"},{"product_id":"goulds-gwp2121-lift-station-18x30-basin-w-ps41p1f-pump","title":"Goulds GWP2121 Lift Station 18\"x30\" Basin w\/PS41P1F Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGoulds GWP2121\u003c\/p\u003e\u003cp\u003eLift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564763848960,"sku":"GWP2121","price":928.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_a046529a-7bcc-4c43-bd71-97d72443886a.jpg?v=1787952347"},{"product_id":"goulds-gwp2122-lift-station-18x30-basin-w-ps42p1f-pump","title":"Goulds GWP2122 Lift Station 18\"x30\" Basin w\/ PS42P1F Pump","description":"\u003cp\u003eGWP2122 Package, includes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-Goulds PS42P1F Sewage Pump\u003c\/li\u003e\n\u003cli\u003e230V, 2\" Solids\u003c\/li\u003e\n\u003cli\u003epiggy back wide angle Float Switch\u003c\/li\u003e\n\u003cli\u003e10' Cord -23\" x 30\" Ribbed Polyethylene Basin\u003c\/li\u003e\n\u003cli\u003e4\" Slip type Inlet Hub and Pump Torque Stop Insert - 18\" Structural Foam Cover with Bolts - Sealing Tape - (2) 2\" vent and discharge grommets - 3\" Vent and Discharge Grommets - Check Valve: A9-2PH 2\" Rubber Sleeve Type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe\u003c\/p\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eSpecially designed for the following uses:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e- Homes\u003c\/li\u003e\n\u003cli\u003erural water districts\u003c\/li\u003e\n\u003cli\u003eparks and dewatering - Wastewater containing solids up to 2\" - Sewage lift station - Anywhere waste or drainage must be disposed of quickly\u003c\/li\u003e\n\u003cli\u003equietly and efficiently - Waste drainage in new additions below sewer line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRibbed Basin Packages with Pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003eRibbed polyethylene basin for strength and durability. - Eight (8) bolt structural foam cover is strong and corrosion resistant. - Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. - Inlet Hub is a molded-in, slip-fit type for fast, easy connection using flexible, slip-fit connectors and clamps (not included). - Fully assembled at the factory. - Vent, discharge and cord holes all pre-drilled. - Torque stop insert to stabilize the pump. - Swing type 2\" check valve: A9-2PH rubber sleeve type or A9-2P compression type - Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cp\u003e23 x 30Ã?'¢â‚¬Â Basin: - Ribbed polyethylene - Usable capacity: 24.8 gal. - Dimensions: 23\" w x 30\" h - Inlet: 4\" slip fit hub for fast, easy connection\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564763947264,"sku":"GWP2122","price":1033.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_12b2f64f-fc92-46d5-bd3b-65ae44c1dbe4.jpg?v=1787952349"},{"product_id":"goulds-gwp2123-lift-station-18x30-basin-w-ps41av-pump","title":"Goulds GWP2123 Lift Station 18\"x30\" Basin w\/ PS41AV Pump","description":"\u003cp\u003eGWP2123 Package, includes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-Goulds PS41AV Sewage Pump\u003c\/li\u003e\n\u003cli\u003e115V, 2\" Solids\u003c\/li\u003e\n\u003cli\u003eT-spliced vertical Float Switch\u003c\/li\u003e\n\u003cli\u003e10' Cord -23\" x 30\" Ribbed Polyethylene Basin\u003c\/li\u003e\n\u003cli\u003e4\" Slip type Inlet Hub and Pump Torque Stop Insert - 18\" Structural Foam Cover with Bolts - Sealing Tape - (2) 2\" vent and discharge grommets - 3\" Vent and Discharge Grommets - Check Valve: A9-2PH 2\" Rubber Sleeve Type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe\u003c\/p\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eSpecially designed for the following uses:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e- Homes\u003c\/li\u003e\n\u003cli\u003erural water districts\u003c\/li\u003e\n\u003cli\u003eparks and dewatering - Wastewater containing solids up to 2\" - Sewage lift station - Anywhere waste or drainage must be disposed of quickly\u003c\/li\u003e\n\u003cli\u003equietly and efficiently - Waste drainage in new additions below sewer line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRibbed Basin Packages with Pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003eRibbed polyethylene basin for strength and durability. - Eight (8) bolt structural foam cover is strong and corrosion resistant. - Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. - Inlet Hub is a molded-in, slip-fit type for fast, easy connection using flexible, slip-fit connectors and clamps (not included). - Fully assembled at the factory. - Vent, discharge and cord holes all pre-drilled. - Torque stop insert to stabilize the pump. - Swing type 2\" check valve: A9-2PH rubber sleeve type or A9-2P compression type - Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cp\u003e23 x 30Ã?'¢â‚¬Â Basin: - Ribbed polyethylene - Usable capacity: 24.8 gal. - Dimensions: 23\" w x 30\" h - Inlet: 4\" slip fit hub for fast, easy connection\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564764111104,"sku":"GWP2123","price":950.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_8a90e9ff-54e6-4996-8073-1898b30013a5.jpg?v=1787952350"},{"product_id":"goulds-gwp2124-lift-station-18x30-basin-w-ps41a1-pump","title":"Goulds GWP2124 Lift Station 18\"x30\" Basin w\/ PS41A1 Pump","description":"\u003cp\u003eGWP2124 Package, includes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-Goulds PS41A1 Sewage Pump\u003c\/li\u003e\n\u003cli\u003e115V, 2\" Solids\u003c\/li\u003e\n\u003cli\u003eT-spliced wide angle Float Switch\u003c\/li\u003e\n\u003cli\u003e10' Cord -23\" x 30\" Ribbed Polyethylene Basin\u003c\/li\u003e\n\u003cli\u003e4\" Slip type Inlet Hub and Pump Torque Stop Insert - 18\" Structural Foam Cover with Bolts - Sealing Tape - (2) 2\" vent and discharge grommets - 3\" Vent and Discharge Grommets - Check Valve: A9-2PH 2\" Rubber Sleeve Type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe\u003c\/p\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eSpecially designed for the following uses:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e- Homes\u003c\/li\u003e\n\u003cli\u003erural water districts\u003c\/li\u003e\n\u003cli\u003eparks and dewatering - Wastewater containing solids up to 2\" - Sewage lift station - Anywhere waste or drainage must be disposed of quickly\u003c\/li\u003e\n\u003cli\u003equietly and efficiently - Waste drainage in new additions below sewer line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRibbed Basin Packages with Pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003eRibbed polyethylene basin for strength and durability. - Eight (8) bolt structural foam cover is strong and corrosion resistant. - Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. - Inlet Hub is a molded-in, slip-fit type for fast, easy connection using flexible, slip-fit connectors and clamps (not included). - Fully assembled at the factory. - Vent, discharge and cord holes all pre-drilled. - Torque stop insert to stabilize the pump. - Swing type 2\" check valve: A9-2PH rubber sleeve type or A9-2P compression type - Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cp\u003e23 x 30\" Basin: - Ribbed polyethylene - Usable capacity: 24.8 gal. - Dimensions: 23\" w x 30\" h - Inlet: 4\" slip fit hub for fast, easy connection\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564764307712,"sku":"GWP2124","price":950.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_49ec68c5-8dfa-4e31-844b-84c6e990f981.jpg?v=1787952351"},{"product_id":"goulds-gwp2132-lift-station-18x30-basin-w-ww0512af-pump","title":"Goulds GWP2132 Lift Station 18\"x30\" Basin w\/WW0512AF Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGoulds GWP2132\u003c\/p\u003e\u003cp\u003eLift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564764406016,"sku":"GWP2132","price":889.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_38759266-a61b-4798-9eef-eb407503f0ed.jpg?v=1787952353"},{"product_id":"goulds-gwp2141-lift-station-18x30-basin-w-pv51p1f-pump","title":"Goulds GWP2141 Lift Station 18\"x30\" Basin w\/PV51P1F Pump","description":"\u003cp\u003eGoulds GWP2141\u003c\/p\u003e\u003cp\u003eLift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564764569856,"sku":"GWP2141","price":1065.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_a5ff96f6-550d-4259-a70b-3d8164505491.jpg?v=1787952354"},{"product_id":"goulds-gwp2142-lift-station-18x30-basin-w-pv52p1f-pump","title":"Goulds GWP2142 Lift Station 18\"x30\" Basin w\/PV52P1F Pump","description":"\u003cp\u003eGoulds GWP2142\u003c\/p\u003e\u003cp\u003eLift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564764668160,"sku":"GWP2142","price":1102.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_9451e7a9-5ea9-4ef9-8659-86abdd1751f1.jpg?v=1787952356"},{"product_id":"goulds-gwp2143-lift-station-18x30-basin-w-pv51av-pump","title":"Goulds GWP2143 Lift Station 18\"x30\" Basin w\/PV51AV Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eGoulds GWP2143 Package includes:\u003c\/strong\u003e -Goulds PV51AV Sewage Pump, 115V, 1 Phase, 2\" Max solids size, T-spliced vertical Float Switch, 10' Cord\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e18\" x 30\" Roll Top Polyethylene Basin 18\" Diameter x 30\" High with 4\" Inlet Grommet and Pump Torque Stop Insert -18\" Structural Foam Cover with Bolts\u003c\/p\u003e\u003cp\u003eSealing Tape\u003c\/p\u003e\u003cp\u003e(2) 2\" vent and Discharge Grommets -(1) 3\" Vent and Discharge Grommets\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eCheck Valve:\u003c\/strong\u003e A9-2PH 2\" Rubber Sleeve Type\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe.\u003c\/p\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eSpecially designed for the following uses:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e-Homes, rural water districts\u003c\/li\u003e\n\u003cli\u003eparks and dewatering -Wastewater containing solids up to 2\" -Sewage lift station -Anywhere waste or drainage must be disposed of quickly\u003c\/li\u003e\n\u003cli\u003equietly and efficiently -Waste drainage in new additions below sewer line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRoll Top Basin Packages with Pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003eFully assembled at the factory for simplified installation. - Structural foam cover is strong and corrosion resistant. - Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. - Rubber grommets for positive seal and easy installation. - Thermoplastic 4\" uniseal inlet grommet. - Factory preset mechanical float switch for dependable automatic operation. - Vent, discharge, inlet and cord holes all pre-drilled. - Torque stop insert to stabilize the pump. - Swing type 2\" check valve: A9-2PH rubber sleeve type or A9-2P compression type -Schedule 40, 2\" PVC discharge pipe with 1⁄8\" bleed hole is factory installed.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cp\u003e18 x 30 — Basin: - Roll top polyethylene - Usable capacity: 14 gal. - Dimensions: 18\" w x 30\" h - Inlet: 4\" inlet grommet\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564764799232,"sku":"GWP2143","price":858.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_f6c467dc-f481-4ab5-a0ed-03c1738e18d1.jpg?v=1787952357"},{"product_id":"goulds-gwp2144-lift-station-18x30-basin-w-pv51a1-pump","title":"Goulds GWP2144 Lift Station 18\"x30\" Basin w\/PV51A1 Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGoulds GWP2144 Lift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564764930304,"sku":"GWP2144","price":846.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_c7539aea-c7eb-4b7f-b5a1-4d0a6438c1a5.jpg?v=1787952359"},{"product_id":"goulds-gwp2145-lift-station-18x30-basin-w-pv51p1-pump","title":"Goulds GWP2145 Lift Station 18\"x30\" Basin w\/PV51P1 Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGoulds GWP2145\u003c\/p\u003e\u003cp\u003eLift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564765094144,"sku":"GWP2145","price":858.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_180cbee0-30db-489a-9bbd-0d016411e423.jpg?v=1787952360"},{"product_id":"goulds-gwp2211-lift-station-18x30-basin-w-ps51p1f-pump","title":"Goulds GWP2211 Lift Station 18\"x30\" Basin w\/PS51P1F Pump","description":"\u003cp\u003eGoulds GWP2211\u003c\/p\u003e\u003cp\u003eLift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564765225216,"sku":"GWP2211","price":1176.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_150227fe-d996-4149-88bf-707ba8cfb203.jpg?v=1787952362"},{"product_id":"goulds-gwp2212-lift-station-18x30-basin-w-ps52p1f-pump","title":"Goulds GWP2212 Lift Station 18\"x30\" Basin w\/PS52P1F Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGoulds GWP2212\u003c\/p\u003e\u003cp\u003eLift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564765389056,"sku":"GWP2212","price":914.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_3f25f5fd-4102-4ac0-9afa-2795b263e4f9.jpg?v=1787952363"},{"product_id":"goulds-gwp2213-lift-station-18x30-basin-w-ps51av-pump","title":"Goulds GWP2213 Lift Station 18\"x30\" Basin w\/PS51AV Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGoulds GWP2213\u003c\/p\u003e\u003cp\u003eLift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564765487360,"sku":"GWP2213","price":876.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_5fecfd5f-5ba1-46c9-8f84-a003b9ff7863.jpg?v=1787952364"},{"product_id":"goulds-gwp2214-lift-station-18x30-basin-w-ps51a1-pump","title":"Goulds GWP2214 Lift Station 18\"x30\" Basin w\/PS51A1 Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGWP2214 Package, Goulds PS51A1 Sewage Pump,115V, 1 Phase, 2\" Max solids size, T-spliced wide angle Float Switch, 10' Cord, 18\" x 30\" Roll Top Polyethylene Basin 18\" Diameter x 30\" High with 4\" Inlet Grommet and Pump Torque Stop Insert, 18\" Structural Foam Cover with Bolts, Sealing Tape and (2) 2\" and (1) 3\" Vent and Discharge Grommets, Check Valve: A9-2P 2\" Rubber Sleeve Type, 2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe.\u003c\/p\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eSpecially designed for the following uses:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e- Homes\u003c\/li\u003e\n\u003cli\u003erural water districts\u003c\/li\u003e\n\u003cli\u003eparks and dewatering - Wastewater containing solids up to 2\" - Sewage lift station - Anywhere waste or drainage must be disposed of quickly\u003c\/li\u003e\n\u003cli\u003equietly and efficiently - Waste drainage in new additions below sewer line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRoll Top Basin Packages with Pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003eFully assembled at the factory for simplified installation. - Structural foam cover is strong and corrosion resistant. - Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. - Rubber grommets for positive seal and easy installation. - Thermoplastic 4\" uniseal inlet grommet. - Factory preset mechanical float switch for dependable automatic operation. - Vent, discharge, inlet and cord holes all pre-drilled. - Torque stop insert to stabilize the pump. - Swing type 2\" check valve: A9-2PH rubber sleeve type or A9-2P compression type - Schedule 40, 2\" PVC discharge pipe with 1⁄8\" bleed hole is factory installed.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cp\u003e18 x 30 — Basin: - Roll top polyethylene - Usable capacity: 14 gal. - Dimensions: 18\" w x 30\" h - Inlet: 4\" inlet grommet\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564765651200,"sku":"GWP2214","price":876.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_b66792f6-192a-4b65-ad6b-8dd8643b0ab1.jpg?v=1787952366"},{"product_id":"goulds-gwp2221-lift-station-18x30-basin-w-ps41p1f-pump","title":"Goulds GWP2221 Lift Station 18\"x30\" Basin w\/PS41P1F Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGoulds GWP2221\u003c\/p\u003e\u003cp\u003eLift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564765749504,"sku":"GWP2221","price":979.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_231c755c-9b47-4d77-a04a-6e8cbb954bd8.jpg?v=1787952368"},{"product_id":"goulds-gwp2222-lift-station-18x30-basin-w-ps42p1f-pump","title":"Goulds GWP2222 Lift Station 18\"x30\" Basin w\/PS42P1F Pump","description":"\u003cp\u003eGWP2222 Package, Goulds PS42P1F Sewage Pump,230V, 1 Phase, 2\" Max solids size, Piggyback wide angle Float Switch, 20' Cord, 18\" x 30\" Roll Top Polyethylene Basin 18\" Diameter x 30\" High with 4\" Inlet Grommet and Pump Torque Stop Insert, 18\" Structural Foam Cover with Bolts, Sealing Tape and (2) 2\" and (1) 3\" Vent and Discharge Grommets, Check Valve: A9-2P 2\" Rubber Sleeve Type, 2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe.\u003c\/p\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eSpecially designed for the following uses:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e- Homes\u003c\/li\u003e\n\u003cli\u003erural water districts\u003c\/li\u003e\n\u003cli\u003eparks and dewatering - Wastewater containing solids up to 2\" - Sewage lift station - Anywhere waste or drainage must be disposed of quickly\u003c\/li\u003e\n\u003cli\u003equietly and efficiently - Waste drainage in new additions below sewer line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRoll Top Basin Packages with Pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003eFully assembled at the factory for simplified installation. - Structural foam cover is strong and corrosion resistant. - Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. - Rubber grommets for positive seal and easy installation. - Thermoplastic 4\" uniseal inlet grommet. - Factory preset mechanical float switch for dependable automatic operation. - Vent, discharge, inlet and cord holes all pre-drilled. - Torque stop insert to stabilize the pump. - Swing type 2\" check valve: A9-2PH rubber sleeve type or A9-2P compression type - Schedule 40, 2\" PVC discharge pipe with 1⁄8\" bleed hole is factory installed.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cp\u003e18 x 30 — Basin: - Roll top polyethylene - Usable capacity: 14 gal. - Dimensions: 18\" w x 30\" h - Inlet: 4\" inlet grommet\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564765847808,"sku":"GWP2222","price":1088.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_58514c6a-f78b-488e-88a1-ce8b29a32b18.jpg?v=1787952369"},{"product_id":"goulds-gwp2223-lift-station-18x30-basin-w-ps41av-pump","title":"Goulds GWP2223 Lift Station 18\"x30\" Basin w\/PS41AV Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGoulds GWP2223\u003c\/p\u003e\u003cp\u003eLift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564766011648,"sku":"GWP2223","price":846.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_ae70911c-194a-4a1d-916c-78e870da8135.jpg?v=1787952371"},{"product_id":"goulds-gwp2224-lift-station-18x30-basin-w-ps41a1pump","title":"Goulds GWP2224 Lift Station 18\"x30\" Basin w\/PS41A1Pump","description":"\u003cp\u003eGWP2224 Package, Goulds PS41A1 Sewage Pump,115V, 1 Phase, 2\" Max solids size, T-spliced wide angle Float Switch, 10' Cord, 18\" x 30\" Roll Top Polyethylene Basin 18\" Diameter x 30\" High with 4\" Inlet Grommet and Pump Torque Stop Insert, 18\" Structural Foam Cover with Bolts, Sealing Tape and (2) 2\" and (1) 3\" Vent and Discharge Grommets, Check Valve: A9-2P 2\" Rubber Sleeve Type, 2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe.\u003c\/p\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eSpecially designed for the following uses:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e- Homes\u003c\/li\u003e\n\u003cli\u003erural water districts\u003c\/li\u003e\n\u003cli\u003eparks and dewatering - Wastewater containing solids up to 2\" - Sewage lift station - Anywhere waste or drainage must be disposed of quickly\u003c\/li\u003e\n\u003cli\u003equietly and efficiently - Waste drainage in new additions below sewer line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRoll Top Basin Packages with Pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003eFully assembled at the factory for simplified installation. - Structural foam cover is strong and corrosion resistant. - Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. - Rubber grommets for positive seal and easy installation. - Thermoplastic 4\" uniseal inlet grommet. - Factory preset mechanical float switch for dependable automatic operation. - Vent, discharge, inlet and cord holes all pre-drilled. - Torque stop insert to stabilize the pump. - Swing type 2\" check valve: A9-2PH rubber sleeve type or A9-2P compression type - Schedule 40, 2\" PVC discharge pipe with 1⁄8\" bleed hole is factory installed.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cp\u003e18 x 30 — Basin: - Roll top polyethylene - Usable capacity: 14 gal. - Dimensions: 18\" w x 30\" h - Inlet: 4\" inlet grommet\u003c\/p\u003e\u003cp\u003eGWP2224 Package, Goulds PS41A1 Sewage Pump,115V, 1 Phase, 2\" Max solids size, T-spliced wide angle Float Switch, 10' Cord, 18\" x 30\" Roll Top Polyethylene Basin 18\" Diameter x 30\" High with 4\" Inlet Grommet and Pump Torque Stop Insert, 18\" Structural Foam Cover with Bolts, Sealing Tape and (2) 2\" and (1) 3\" Vent and Discharge Grommets, Check Valve: A9-2P 2\" Rubber Sleeve Type, 2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564766142720,"sku":"GWP2224","price":1004.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_081bca9e-3743-4d2f-8137-f4dedd5fd919.jpg?v=1787952373"},{"product_id":"goulds-gwp2241-lift-station-18x30-basin-w-pv51p1f-pump","title":"Goulds GWP2241 Lift Station 18\"x30\" Basin w\/PV51P1F Pump","description":"\u003cp\u003eGoulds GWP2241 Lift Station 23\"x30\" Basin w\/PS51P1F Pump, 115 Volts\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eChoice of Pumps:\u003c\/strong\u003e PV Vortex PS Non-clog WW05 Vortex Roll Top 18x30 Polyethylene Basin Fully assembled at the factory for simplified installation. Structural foam cover is strong and corrosion resistant. Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. Thermoplastic 4\" uniseal inlet grommet. Factory preset mechanical float switch for dependable automatic operation. Torque stop insert to stabilize the pump. Swing type 2\" check valve: A9-2PH rubber sleeve type A9-2P compression type Schedule 40, 2\" PVC discharge pipe with 1\/8\" bleed hole is factory installed. SPECIFICATIONS 18 x 30 - Basin: Roll top polyethylene basin Usable capacity: 14 gallons Dimensions: 18\" w x 30\" h Inlet: 4\" inlet grommet\u003c\/li\u003e\u003c\/ul\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564766273792,"sku":"GWP2241","price":1115.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_b1b0a398-cd8e-44fd-a081-562ac128794d.jpg?v=1787952374"},{"product_id":"goulds-gwp2242-lift-station-18x30-basin-w-pv52p1f-pump","title":"Goulds GWP2242 Lift Station 18\"x30\" Basin w\/PV52P1F Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGWP2242 Package, Goulds PV51P1F Sewage Pump,230V, 1 Phase, 2\" Max solids size, Piggyback wide angle Float Switch, 20' Cord, 18\" x 30\" Roll Top Polyethylene Basin 18\" Diameter x 30\" High with 4\" Inlet Grommet and Pump Torque Stop Insert, 18\" Structural Foam Cover with Bolts, Sealing Tape and (2) 2\" and (1) 3\" Vent and Discharge Grommets, Check Valve: A9-2P 2\" Rubber Sleeve Type, 2\" Diameter x 30\" Long Schedule 40 PVC Discharge Pipe.\u003c\/p\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eSpecially designed for the following uses:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e- Homes\u003c\/li\u003e\n\u003cli\u003erural water districts\u003c\/li\u003e\n\u003cli\u003eparks and dewatering - Wastewater containing solids up to 2\" - Sewage lift station - Anywhere waste or drainage must be disposed of quickly\u003c\/li\u003e\n\u003cli\u003equietly and efficiently - Waste drainage in new additions below sewer line\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRoll Top Basin Packages with Pump\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003eFully assembled at the factory for simplified installation. - Structural foam cover is strong and corrosion resistant. - Vent grommets for both 2\" and 3\" vent provided. Adds system flexibility and reduces inventory. - Rubber grommets for positive seal and easy installation. - Thermoplastic 4\" uniseal inlet grommet. - Factory preset mechanical float switch for dependable automatic operation. - Vent, discharge, inlet and cord holes all pre-drilled. - Torque stop insert to stabilize the pump. - Swing type 2\" check valve: A9-2PH rubber sleeve type or A9-2P compression type - Schedule 40, 2\" PVC discharge pipe with 1⁄8\" bleed hole is factory installed.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cp\u003e18 x 30 — Basin: - Roll top polyethylene - Usable capacity: 14 gal. - Dimensions: 18\" w x 30\" h - Inlet: 4\" inlet grommet\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":49564766404864,"sku":"GWP2242","price":971.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GouldsGWP1_fc1d85e6-3cec-4050-aa3d-ab154bc41ef1.jpg?v=1787952376"}],"url":"https:\/\/waterpumpspro.com\/collections\/packaged-systems.oembed","provider":"Water Pumps Pro","version":"1.0","type":"link"}