{"title":"Home Featured","description":null,"products":[{"product_id":"goulds-j10s-1-hp-shallow-water-well-jet-pump-115-230v-1-phase","title":"Goulds J10S Shallow Well Jet Pump – JS+ Series, 1 HP, 115\/230V, Single Phase, 24.8 GPM at 5 ft (30 PSI), Cast Iron Body","description":"\u003cp\u003eThe Goulds J10S is a 1 HP, 115\/230-volt, single-phase shallow well jet pump with an integral shallow well adapter built into the casing, so no separate adapter is needed. It is a compact, ready-to-install choice for homes and cottages on a shallow well. Suction is 1-1\/4\" NPT and discharge is 1\" NPT.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 1 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 115\/230V, Single-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 24.8 GPM at 30 PSI, 5 ft suction lift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Switch:\u003c\/strong\u003e 30-50 PSI (AS4), preset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Connections:\u003c\/strong\u003e 1-1\/4\" NPT suction, 1\" NPT discharge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 18-3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 50 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Liquid Temperature:\u003c\/strong\u003e 140°F (60°C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Compact -- integral shallow well adapter built into the casing, eliminating the need for a separate adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing:\u003c\/strong\u003e Cast iron, back pullout serviceable design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e FDA-compliant, glass-filled engineered composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiffuser:\u003c\/strong\u003e Bolt-down, food-grade glass-filled composite with stainless steel wear ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubing \u0026amp; Fittings:\u003c\/strong\u003e Corrosion-resistant, UV-resistant engineered plastic with hand-tight O-ring connections; nozzle clean-out plug in the pump case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e Two-compartment design; NEMA standard, stainless steel shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Seal:\u003c\/strong\u003e Diaphragm-protected -- never runs dry; excellent air-handling and re-prime ability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Electrocoat baked paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e NSF\/ANSI 61 \u0026amp; 372 listed (jet pump and shallow well components)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Homes, cottages, and booster service.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eInstallation note: a pressure tank is required on all systems. Wiring must be performed by a qualified electrician in accordance with local codes and the National Electrical Code.\u003c\/em\u003e\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48798661181696,"sku":"J10S","price":663.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/JS_f8d241dc-fb31-40a2-8df4-5698c4bc42db.jpg?v=1780608912"},{"product_id":"goulds-cb15412cr-submersible-pump-control-box-1-5hp-230v-1-phase","title":"Goulds CentriPro CB15412CR – Simplex CSCR Control Box, 1-1\/2 HP, 230 Volts, 1 Phase, Indoor\/Outdoor NEMA 3R","description":"\u003cp\u003eThe Goulds CentriPro CB15412CR is a CSCR (Capacitor Start-Capacitor Run) pump control box sized for 1-1\/2 HP, 230-volt, single-phase, 3-wire submersible well pump motors. It houses the starting and running components a 3-wire motor needs to run on a single-phase circuit, in a NEMA 3R enclosure suitable for indoor or outdoor installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 1-1\/2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKilowatts:\u003c\/strong\u003e 1.1 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V, Single-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Type:\u003c\/strong\u003e 3-wire submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Circuit Breaker:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Fuse:\u003c\/strong\u003e 35 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Element Time-Delay Fuse:\u003c\/strong\u003e 20 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA 3R, indoor\/outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Dimensions (W x D x H):\u003c\/strong\u003e 8.1\" x 5.9\" x 9.3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 7 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMay Replace Franklin Electric #:\u003c\/strong\u003e 2823008110\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Relay:\u003c\/strong\u003e Installer-convenience relay (230V standard; 208V relay, part 9K479, available for low-voltage applications)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart Capacitor:\u003c\/strong\u003e For starting torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun Capacitor:\u003c\/strong\u003e For efficiency and quiet operation (Capacitor Start-Capacitor Run design)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Type 3R, rated for indoor or outdoor mounting, accepts up to #2 AWG wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Multiple knockouts, two ground terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Switch Note:\u003c\/strong\u003e Higher-HP models require a heavy-duty pressure switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light-commercial single-phase well pump installations using a 4\", 3-wire submersible motor -- private water systems, domestic water supply, and small booster applications.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eInstallation note: for use with 3-wire, single-phase submersible motors only -- select the control box rated for the motor’s HP and supply voltage. All wiring must be performed by a qualified electrician in accordance with local codes and the National Electrical Code.\u003c\/em\u003e\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48798669406464,"sku":"CB15412CR","price":182.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/CB15412CR.jpg?v=1780608931"},{"product_id":"goulds-gt20-self-priming-irrigation-pump-2hp-230v-1-phase","title":"Goulds GT20 IRRI-GATOR Self-Priming Centrifugal Pump – 86 GPM, 2 HP, 230V, Single-Phase, ODP, 1-1\/2\" NPT","description":"\u003cp\u003eThe Goulds GT20 is a 2 HP, 230-volt, single-phase self-priming centrifugal irrigation pump with an ODP (Open Drip Proof) motor. Once initially primed, it reprimes automatically whenever the water level rises above the end of the suction pipe, making it well suited to seasonal irrigation and sprinkler systems. Suction and discharge are both 1-1\/2\" NPT.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V, Single-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Enclosure:\u003c\/strong\u003e ODP (Open Drip Proof)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 86 GPM at 20 PSI, 5 ft suction lift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Head:\u003c\/strong\u003e Up to 128 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure:\u003c\/strong\u003e 125 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Reprime Suction Lift:\u003c\/strong\u003e 25 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Connections:\u003c\/strong\u003e 1-1\/2\" NPT suction, 1-1\/2\" NPT discharge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 65 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 20-31\/32\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Liquid Temperature:\u003c\/strong\u003e 140°F (60°C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Self-priming -- repimes automatically once the water level rises above the end of the suction pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasing:\u003c\/strong\u003e Cast iron, 4-bolt back pullout design with vacuum gauge and drain openings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e Glass-filled, abrasion-resistant engineered composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiffuser:\u003c\/strong\u003e Bolt-down, FDA-compliant glass-filled engineered composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e Two-compartment design; NEMA standard, stainless steel shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Seal:\u003c\/strong\u003e Carbon \/ ceramic faces, Buna elastomers, 300 series stainless steel metal parts; a diaphragm prevents dry-run damage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Electrocoat paint, inside and out\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Lawn sprinkling and irrigation, air conditioning systems, heat pumps, water transfer, and dewatering.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eInstallation note: wiring must be performed by a qualified electrician in accordance with local codes and the National Electrical Code, using a dedicated, properly grounded circuit. The pump must be initially primed with water before startup.\u003c\/em\u003e\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48798698569984,"sku":"GT20","price":776.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GT10-30_ad583185-ac49-4d5e-9f73-79842102a867.jpg?v=1780609022"},{"product_id":"spd40100f-spd-controller-for-submersible-centrifugal-pump","title":"SPD40100F SPD Controller for Submersible \u0026 Centrifugal Pump","description":"\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eThis item is obsolete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong style=\"color: red;\"\u003eCall for replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAquavar SPD with Filter SPD40100F Output full load amps: 3 Phase Input-18.5 CentriPro \"Aquavar SPD\" variable speed, constant pressure pump controller is designed for the professional pump installer. With application specific features and CentriPro designed software, the SPD was developed specifically for use with submersible and centrifugal pumps. This variable speed controller goes beyond a \"standard\" drive, giving the pump professional a rugged design that is built for demanding conditions. TYPICAL APPLICATIONS Irrigation - Irrigation applications use both submersible and surface pumps. Choose an SPD for control standard 4\" and 6\" submersible motors as well as turbine pumps and surface centrifugal pumps up to 30 HP. Rural Water Pressure Boosting Agriculture Retrofit - Existing constant speed control systems Phase Conversion - 1 phase to 3 phase power Two Versions for Submersible and Above Ground Installations SPD ____F (example: SPD20050F) Models have filters to reduce electrical noise created by drives with long wire runs, typical of submersible installations. KEY FEATURES AND BENEFITS Energy Saving - The SPD is a true variable frequency controller which adjusts motor speed to match the hydraulic needs of the system to maintain pressure. Unlike valve controlled systems, the energy draw is substantially reduced during lower flow while keeping the pump close to its best efficiency. Up to 70% energy savings over fixed speed pumps are common. Easy Set-up - Install wiring, set DIP switches and go! Total set up time including wiring is less than 30 minutes. NEMA 3R - Outdoor rated enclosure with operating temperatures from -22 F to 122 F Dual Phase Input - UL listed for both three phase and single phase input (derated available). Filter - Includes output filter rated to 1000 feet of motor lead, standard on models with \"F\" suffix for submersible installations. True Motor Match - The SPD is designed for the higher amp requirements typical of submersible pumps on start-up. A 10 HP SPD will run a 10 HP submersible pump! Transducer - As with all CentriPro drives, the pressure transducer is included. Full Diagnostics - Electrical protection and diagnostics, plus a full range of pump protection features such as bound pump or motor shut down, low water or loss of prime shut down. Lockout\/Tagout - Cover can be locked to prevent unauthorized entry. Remote on\/off - Permits external control by timers (irrigation), float or pressure switches (tank draining) or manual control. Dry contact closure required. Hand\/Auto Option - Allows the drive to be run at full speed without a pressure transducer for longer periods of time as in the case of new well development or system start up. Turning the control back to auto resumes the automatic pressure tracking and control. Remote Monitoring - External monitors may be connected to the drive for monitoring pump running speed(4-20 mA output based on speed), pump on, and system fault. The fault indicator can also be connected to devices like an auto-dialer. This enables control of pumps and drives in un-manned locations. The 4-20 mA output can be utilized for functions such as an external dosing system, or chlorine injection. Pressure Drop - The drive restart value can be adjusted from 5 PSI drop to 20 PSI. This allows for fewer starts and for small leaks that can be common in irrigation systems. Dual Set Point - Two pressure set points are available, controlled with an external switch, such as a timer. No Water Restart - Adjust the time delay after a \"dry well\" fault, from 10 minutes to 2 hours between each restart. Ideal for low yielding wells.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48798803263744,"sku":"SPD40100F","price":3504.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/SPD.jpg?v=1780609418"},{"product_id":"goulds-gwp1131-lift-station-23-x30-basin-w-ww0511a-pump","title":"Goulds GWP1131  Lift Station 23\"x30\" Basin w\/  WW0511A Pump","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: red;\"\u003eThe item is obsolete. Contact us for replacement\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Goulds GWP1131 is a factory-assembled simplex sewage lift station built around a 23\"x30\" roll-top polyethylene basin and a WW0511A submersible pump, 115 Volts. It is designed as a complete, pre-plumbed package for pumping wastewater or effluent from a low point up into a gravity or pressure sewer line.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasin Size:\u003c\/strong\u003e 23\"x30\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasin Material:\u003c\/strong\u003e Roll-top polyethylene, structural foam cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Included:\u003c\/strong\u003e WW0511A, 115V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 115V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e Factory-preset mechanical float switch (automatic operation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck Valve:\u003c\/strong\u003e 2 in swing-type check valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge Piping:\u003c\/strong\u003e Schedule 40, 2 in PVC discharge pipe with 1\/8 in bleed hole, factory installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet:\u003c\/strong\u003e 4 in thermoplastic uniseal inlet grommet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVent:\u003c\/strong\u003e Grommets provided for both 2 in and 3 in vent\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Used as a packaged simplex lift station for pumping residential or light commercial sewage and effluent where gravity drainage is not available.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48798820565248,"sku":"GWP1131","price":923.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/GWP1.jpg?v=1780609493"},{"product_id":"goulds-cb10412-submersible-pump-control-box-1hp-230v-1-phase","title":"Goulds CentriPro CB10412 – Simplex Quick Disconnect Control Box, 1 HP, 230 Volts, 1 Phase, Indoor\/Outdoor NEMA 3R","description":"\u003cp\u003eThe Goulds CentriPro CB10412 is a Quick Disconnect (Q-D) pump control box sized for 1 HP, 230-volt, single-phase, 3-wire submersible well pump motors. It houses the starting and running components a 3-wire motor needs to run on a single-phase circuit, in a NEMA 3R enclosure suitable for indoor or outdoor installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 1 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKilowatts:\u003c\/strong\u003e .75 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230V, Single-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Type:\u003c\/strong\u003e 3-wire submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Circuit Breaker:\u003c\/strong\u003e 25 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Fuse:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Element Time-Delay Fuse:\u003c\/strong\u003e 20 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA 3R, indoor\/outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Dimensions (W x D x H):\u003c\/strong\u003e 4.8\" x 2.9\" x 8.4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 4 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMay Replace Franklin Electric #:\u003c\/strong\u003e 280 108 49\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Relay:\u003c\/strong\u003e Installer-convenience relay for correct start-circuit switching (115V and 230V models; 208V relay available for low-voltage applications)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart Capacitor:\u003c\/strong\u003e With resistor, for motor starting torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA 3R, rated for indoor or outdoor mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Design:\u003c\/strong\u003e Quick-disconnect cover will retrofit with other Q-D control boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Multiple knockouts, two grounding lugs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Residential and light-commercial single-phase well pump installations using a 4\", 3-wire submersible motor -- private water systems, domestic water supply, and small booster applications.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eInstallation note: for use with 3-wire, single-phase submersible motors only -- select the control box rated for the motor’s HP and supply voltage. All wiring must be performed by a qualified electrician in accordance with local codes and the National Electrical Code.\u003c\/em\u003e\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799219712256,"sku":"CB10412","price":139.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/IMG_1244.jpg?v=1780611273"},{"product_id":"goulds-s1gd2-custom-control-panels-simplex-2hp-1ph","title":"Goulds S1GD2, Custom Control Panels, simplex, 2HP, 1PH","description":"\u003cp\u003eThe Goulds S1GD2 is a simplex 2 HP, 1-phase custom control panel for single-phase grinder pump systems, built with a NEMA 4X fiberglass enclosure and a built-in capacitor pack to start the grinder motor(s).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Simplex (1-pump)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\/Phase:\u003c\/strong\u003e 1-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA 4X fiberglass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Type:\u003c\/strong\u003e Grinder control panel with built-in capacitor pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Protection:\u003c\/strong\u003e Pump circuit breaker(s), control circuit breaker, motor contactor(s)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitches:\u003c\/strong\u003e Hand-Off-Automatic (H-O-A) switch(es)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e High-level alarm circuit, flashing red light, 101 dB horn @ 10 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListing:\u003c\/strong\u003e UL and cUL listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Used to control and protect simplex grinder pump stations in residential and light commercial sewage\/effluent applications.\u003c\/p\u003e","brand":"Goulds","offers":[{"title":"Default Title","offer_id":48799274893568,"sku":"S1GD2","price":2643.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/2222\/3360\/files\/SES_Duplex_Control_Panels_875dced6-41c8-47d4-aa4a-ed963702415d.jpg?v=1780612775"}],"url":"https:\/\/waterpumpspro.com\/collections\/frontpage.oembed","provider":"Water Pumps Pro","version":"1.0","type":"link"}