Goulds WS0511B Sub Sewage Pump 3886 1/2HP 115V 1Ph 2" Solids


■ Impeller: Cast iron, semi-open, dynamically balanced, non-clog with pump out vanes for mechanical seal protection. Optional Silicon bronze impeller available.
■ Casing: Cast iron volute type for maximum efficiency. Designed for easy installation on A10-20 guide rail or base elbow rail systems.
■ Mechanical Seal: SILICON CARBIDE VS. SILICON CARBIDE sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers.
■ Shaft: Corrosion-resistant stainless steel. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation.
■ Fasteners: 300 series stainless steel.
■ Capable of running dry without damage to components.
■ Designed for continuous operation when fully submerged.

Specifically designed for the following uses:
Sewage systems
Water transfer

Solids handling capabilities: 2" maximum.
Discharge size: 2" NPT.
Capacities: up to 185 GPM.
Total heads: up to 38 feet TDH.
Temperature: 104F (40C) continuous, 140F (60C)intermittent.

■ Fully submerged in high grade turbine oil for lubrication and efficient heat transfer. All ratings are within
the working limits of the motor.
■ Class B insulation.
Single phase (60 Hz):
All single phase models feature capacitor start motors for maximum starting torque.
Built-in overload with automatic reset.
SJTOW or STOW severe duty oil and water resistant power cords.
1⁄3 1 HP models have NEMA three prong grounding plugs.
Three phase (60 Hz):
Class 10 overload protection must be provided in separately ordered starter unit.
STOW power cords all have bare lead cord ends.
■ Bearings: Upper and lower heavy duty ball bearing construction.
■ Designed for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits, can be operated continuously without damage when fully submerged.
■ Power Cable: Severe duty rated, oil and water resistant. Epoxy seal on motor end provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking. Standard cord is 20'. Optional lengths are available.
■ Motor Cover O-ring: Assures positive sealing against contaminants and oil leakage.

Also available in alternate voltages:
115V = WS0511B Cost: $ 550.00
208V = WS0518B Cost: $ 593.13

WS0511B, 1/2HP, 1 Phase, 115V, 1750 RPM, 5.00", 14.5 Amps max, 70 Lbs shipping weight

Add to Cart:

  • Model: WS0511B
  • Shipping Weight: 70lbs
  • 5 Units in Stock
  • Manufactured by: Goulds

This product was added to our catalog on Wednesday 22 February, 2012.